Bug #5047
closedBF888S 'Radio Refesued to Enter Programming mode' Error + Chinese Language + Long beep Tone
0%
Description
Hello Guys,
I am an enthusiast newbie to Walkie talkie and just bought a pair of BF-888s. I read few articles and youtube videos to configure the walkie talkie using the software from this site (http://www.miklor.com/BF888/888-SW-BF888S.php).
When i connected one of my radio after installing the software, and tried to read and write the frequencies(https://wiki.radioreference.com/index.php/FRS/GMRS_combined_channel_chart)with the software and disconnected from the cable, from then my radio language is set to 'Chinese' and hearing a long beep tone, when ever i switch ON the radio. I am able to read from the radio but NOT WRITE in it.
Please, let me know how to resolve this issue.
Cheers,
Kart
Updated by nikos nikos over 7 years ago
Hello my friend the sw-888s not work also and with my radio 888s try with Chirp or ZT-V68 .
\You hear a long beep tone because the memory of chanel is empty ...
Updated by Kart Shan over 7 years ago
nikos nikos wrote:
Hello my friend the sw-888s not work also and with my radio 888s try with Chirp or ZT-V68 .
\You hear a long beep tone because the memory of chanel is empty ...
Hello Nikos,
Thanks a lot for your inputs, it works fine now :) :)
Cheers
Kart
Updated by Kart Shan over 6 years ago
@nikos nikos
could you please let me know, how to set fm in bf888s using ZT_V68 software?
Thanks in advance.
Cheers
Kart
Updated by Bernhard Hailer almost 5 years ago
- Status changed from New to Closed
- Priority changed from High to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from BF-888S to Baofeng BF-888S
No more traffic on this ticket.