Project

General

Profile

Actions

Bug #51

closed

WFM on Kenwood TH-F6A missing

Added by David Ranch almost 13 years ago. Updated over 12 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
Category:
-
Target version:
-
Start date:
02/03/2012
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
TH-F6A
Platform:
Linux
Debug Log:
I read the instructions above:

Description

The Kenwood TH-F6A supports Broadcast FM reception but Chirp's current selection of modes doesn't offer WFM (Wide FM). There should be NFW (5Khz deviation), FM (10Khz), and WFM (150Khz).

Actions #1

Updated by Dan Smith almost 13 years ago

Since I don't have one of these, please do the following:

  1. Set a channel to WFM mode
  2. Attempt to download the radio whilst saving the console (or debug log) output
  3. Attach the log here and tell me which memory you set to WFM

Thanks!

Actions #2

Updated by Dan Smith almost 13 years ago

  • Status changed from New to Feedback

Have you had a chance to do this? If you haven't, but plan to, please just note it here so I don't close the bug as abandoned.

Thanks!

Actions #3

Updated by David Ranch almost 13 years ago

Will test

Actions #4

Updated by Dan Smith over 12 years ago

  • Target version set to 0.2.3
Actions #5

Updated by Dan Smith over 12 years ago

  • Status changed from Feedback to Rejected
  • Target version deleted (0.2.3)

I'm not sure when this was a problem, because it seems like it has been supported since the very early days of this driver. I just tested on an F6 and it seems to be working fine. So, closing this bug. Please re-open if there is something else to be done.

Actions

Also available in: Atom PDF