Project

General

Profile

Actions

Bug #5107

closed

Baofeng UV-5R - Radio refused to accept block 0x0810

Added by Dan Ribeiro about 7 years ago. Updated over 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
08/25/2017
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
All
Debug Log:
I read the instructions above:

Description

I've seen an thread from two years ago with the same issue resolved. But it seems to be happening again.

I can clone the radio with CHIRP, but when I try to upload I receive the message "Radio refused to accept block 0x0810"

Brand new Baofeng UV-5R
Firmware: HN5RV01
Power on message: 141006N
Chirp-daily-20170714
(tested also with chirp-daily-20170108)
Mac OS X Sierra 10.12.6

I would really appreciate some help... It's driving me nuts.


Files

Screen Shot 2017-08-25 at 22.50.11.png (98.1 KB) Screen Shot 2017-08-25 at 22.50.11.png Dan Ribeiro, 08/25/2017 07:13 PM
screenshot.png (95.4 KB) screenshot.png Pascal CATRIC, 08/26/2017 11:59 PM
Actions #1

Updated by Pascal CATRIC about 7 years ago

I have exactly the same issue with same firmware.

Actions #2

Updated by Mathias Tausen almost 7 years ago

Same firmware version and problem here, on Ubuntu and CHIRP daily-20180210.
Programmed the radio a couple of times with different settings without issues, then this started occuring.

Did you guys find a solution?

Actions #3

Updated by Mathias Tausen almost 7 years ago

Looking in dmesg, I'm getting the following line when the problem occurs:

pl2303 ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71

Here's the info that shows up when connecting the programming cable:

[30811.871087] usb 3-2: new full-speed USB device number 7 using xhci_hcd
[30812.011974] usb 3-2: New USB device found, idVendor=067b, idProduct=2303
[30812.011979] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30812.011981] usb 3-2: Product: USB-Serial Controller
[30812.011984] usb 3-2: Manufacturer: Prolific Technology Inc.
[30812.012597] pl2303 3-2:1.0: pl2303 converter detected
[30812.013680] usb 3-2: pl2303 converter now attached to ttyUSB0
Actions #4

Updated by Bernhard Hailer about 4 years ago

  • Chirp Version changed from 0.4.0 to daily
  • Model affected changed from UV-5R to Baofeng UV-5R

All submitters: please provide a debug log as described in the Wiki: "How To Report Issues". Thanks!

Actions #5

Updated by Bernhard Hailer about 4 years ago

  • Status changed from New to Feedback
  • Platform changed from MacOS to All
Actions #6

Updated by Bernhard Hailer over 3 years ago

  • Status changed from Feedback to Closed

No more traffic on this ticket.

Actions

Also available in: Atom PDF