Bug #5495
openIcom ID-51 - offset in alpha channels incorrect
0%
Description
DEAR CHIRP THANKS IN ADVANCE FOR YOUR WORK
I SEE THAT WITH LAST CHIRP ( JAN 4 2018 ) I CAN PROGRAM MY ICOM ID 51 . IM VERY HAPPY BUT THERE ARE A PROBLEM ON ALPHA CHANNELS .
I PUT SHIFT -0.600000 AND I TRANSFER TO RADIO . WHEN I PUSH THE PTT I SEE DIFFERENT FREQUENCY ON TX .
FOR EXAMPLE : 145.737,5 - 0.60000 MUST ON PTT TX ON 145,137,5 , BUT TRASMITTING FREQUENCY IS 145,25750...SO SHIFT IS 0,480000
FOR EXAMPLE : 430.312,5 + 1.60000 MUST ON PTT TX ON 431,912,5 , BUT TRASMITTING FREQUENCY IS 431,592,5 .... SO SHIT IS 1.28000
THIS KIND OF MISTAKE ONLY ON ALL ALPHA CHANNEL. ON NORMAL FREQUENCY UHF VHF ALL ARE OK . ONLY ALPHA CHANNELS.
I THINK PROGRAM ARE NOT ABLE TO MAKE MINUS 0.600 WHEN AFTER LAST 3 NUMBER OF FREQ IT FIND ANOTHER NUMBER AS ALPHA CHANNELS
THANKS IN ADVANCE FOR ALL . JUST TO INFORM YOU ALSO THAT WITH LAST CHIRP ( JAN 4 2018 ) NOW I CAN PROGRAM ALSO WOUXUN KG-UV8D PLUS. WITH WOUXUN ALL OK ALL WORK ALSO ALPHA CHANNELS.
MY THANKS . IU2ACH ( FABIO ) FROM ITALY
Updated by fabio savorelli almost 7 years ago
please check importing from radio with icom software problem describe in my report ...look alpha channel
Yesterday i memorize ico id 51 using chirp
thanks in advance for your support...
Also today with last chirp jan 15 2018 program dont reconize icom id 51 ...it say problem it com port..but com port working ...i used orginal softaware...
many thanks for all...
IU2ACH Fabio ( Italy )
Updated by Bernhard Hailer over 4 years ago
- Subject changed from ICOM ID 51 to Icom ID-51 - offset in alpha channels incorrect
- Status changed from New to Feedback
- Assignee deleted (
Dan Smith) - Priority changed from Urgent to Normal
- Target version changed from 0.4.1 to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from ICOM ID 51 to Icom ID-51
Have you tried with a recent version since you submitted this?
Updated by Bernhard Hailer about 4 years ago
Fabio, if you still can't connect to your ID-51 any more, please provide a debug log as described in the Wiki: "How To Report Issues". Thanks!