Project

General

Profile

Actions

Bug #5933

open

Icom IC-208, IC-208H offset frequency not always correct

Added by Pedro CT over 6 years ago. Updated over 4 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
07/07/2018
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Icom IC-208, IC-208H
Platform:
All
Debug Log:
I read the instructions above:

Description

Hello,
when reading from the radio icom 208/208h (on both models) offset frequency sometimes presents an error.
When offset frequency is 0.600 down it will show 0.480 and when is 7.600 down it will show 6.088
This happens when there is no tone when you select a tone but if toneSql is selected the offsef frequency is displayed correctly.
If offset is corrected on the pc when it is uploaded the radio will transmit on a lower frequency than expected.
Tested on windows and linux (Ubuntu).

Actions #1

Updated by Pedro CT over 6 years ago

Correction to the previous text:

If you have a tone (continuous tone) or no tone than the offset frequency is incorrectly ddisplayed.
If you have ToneSql selected than the offset frequency is correctly displayed.

Sorry for this but it was late in the evenning.

Actions #2

Updated by Bernhard Hailer over 4 years ago

  • Subject changed from IC 208h / 208 offset freq to Icom IC-208, IC-208H offset frequency not always correct
  • Target version set to chirp-legacy
  • Chirp Version changed from 0.4.0 to daily
  • Model affected changed from IC208 to Icom IC-208, IC-208H
Actions

Also available in: Atom PDF