Bug #6089: FTM-3200 Checksum Failed [064A-06C8 (@06C9)] - CHIRP

Actions

Copy link

Bug #6089

closed

FTM-3200 Checksum Failed [064A-06C8 (@06C9)]

Added by William J Dieringer over 6 years ago. Updated over 4 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Category:

Target version:

chirp-legacy

Start date:

09/06/2018

Due date:

% Done:

Estimated time:

Chirp Version:

daily

Model affected:

Yaesu FTM-3200

Platform:

Windows

Debug Log:

I read the instructions above:

Description

Using latest build with Windows 10.
Receiving this error while "Reading from Radio".
Progress bar makes it all the way to completion then the error pops up.

Actions

Copy link

Updated by William J Dieringer over 6 years ago

Using RT-Systems cable.

Actions

Copy link

Updated by Bernhard Hailer over 4 years ago

Status changed from New to Feedback
Target version set to chirp-legacy

Have you been able to resolve this on your own since you submitted this?
Have you tried with a recent version since you submitted this?

This could be a cable issue. Please refer to these Wiki articles:
CableGuide
CableGuide FTDI OEM Cables

If there's no solution to be found in any of them, please read: How To Report Issues and provide a debug log. Thank you!

Windows: If you are using a generic cable with a Prolific chip, you will very likely need to downgrade your driver to version 3.2.0.0.
It can be found at http://www.miklor.com/COM/UV_Drivers.php

Actions

Copy link