Bug #6215
closedMackbook Issue
0%
Description
I have installed the drivers per Baofeng, I have a cable from them, the drivers are installed in OSX, however in Chirp it does not show as a section in port......
Updated by Ken Binkley about 6 years ago
I have tried to install Chirp Again, still no luck using a Baofeng cable, talked with them and all trouble shooting points back to software. In the drop down menu the correct port is not listed. All was working good until the update, I can not get any radio to work as long I can not select the correct port.
Updated by Ken Binkley about 6 years ago
I have tried to install Chirp Again, still no luck using a Baofeng cable, talked with them and all trouble shooting points back to software. In the drop down menu the correct port is not listed. All was working good until the update, I can not get any radio to work as long I can not select the correct port.
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Closed
- Target version set to chirp-legacy
- Platform changed from Windows to MacOS
This isn't a Chirp bug, nor a Feature or New Model request.
This is a question best asked on the "mailing list":http://intrepid.danplanet.com/mailman/listinfo/chirp_users.
You might get (much) quicker feedback there.