Bug #6301
closednot the amount of data we want
0%
Description
Trying to read/clone data from Baojie BJ-218
on Win7 64bit with Chirp daily, cable - a kind of multiversion X-in-1 with interchagable connectors with Profilic driver 3.2.0.0.
I am getting:
Exception Dialog: Error reading from radio: not the amount of data we want.
Debug.log attached.
Notes:
I can clone Baofeng UV-5R with the same cable another connector.
The cable I used is this one:
https://www.ebay.co.uk/itm/8-in-1-USB-Programming-Cable-MOTOROLA-ICOM-KENWOOD-YAESU-Handheld-Mobile-Radio-/201674412211
I used that end/connector marked with "K-8108 etc."
In that group is likely included these:
K-8108: TK-7102/TK-8102, TK-7108/TK-8108
TK-740/TK-840, TK-750
TK-705/TK-805, TK-709/TK-809, TK-706/TK-806, TK-706D/TK-806D
TK-752/TK-852, TK-759/TK-859, TK-940/TK-941TK/840/TK-940, TK-841/TK-941, TK-715/TK-815, TK-705D/TK-805D, TK-630/TK-730/TK-830/TK-930, TK-709/TK-809, TK-6110K, TK-6110K2 series etc°
Files
Updated by Jony Forester almost 6 years ago
My suspicions about that cable is wrong was right.
I started to check the pinouts of cable I used and and to caompare those that I found on internet:
https://sutemos.lt/picture.php?/46/category/9
http://www.popular-hifi.com/shack/qyt_kt7900d/index.html
And found that they are different.
Soldered my version and voila - it is working ;-)
The right one is:
!http://www.popular-hifi.com/shack/qyt_kt7900d/RJ45_pinout.jpg!
Conclusion:
The Exception "Error reading from radio: not the amount of data we want" could mean also that wrong cable or messed pinouts are used.
Thank you for your work and mark this as fixed.
Updated by Bernhard Hailer almost 5 years ago
- Status changed from New to Closed
Resolved by submitter, closed as requested.