Project

General

Profile

Actions

Feature #65

closed

No support for different receive and transmit PL tones.

Added by geoffrey mendelson over 12 years ago. Updated over 12 years ago.

Status:
Closed
Priority:
Low
Assignee:
Category:
-
Target version:
Start date:
02/20/2012
Due date:
% Done:

0%

Estimated time:
Chirp Version:
0.2.1
Model affected:
(All models)
I read the instructions above:

Description

Some Amateur and commercial repeaters operate with a different PL tone for receive than transmit.
Radios sold for ham use rarely support it, but ones sold for commerical users do.
E.g. the Baofeng UV-3r Mark II.
Currently CHIRP reads only the transmit PL.
I don't know if any of the other radios supported by CHIRP support it or not.

Actions #1

Updated by Dan Smith over 12 years ago

  • Tracker changed from Bug to Feature
  • Assignee set to Dan Smith
  • Priority changed from Normal to Low

This is a feature, not a bug. It has been discussed many times and I know it's a shortcoming that affects a very small subset of users. I'll leave this open until I get around to it.

Actions #2

Updated by Dan Smith over 12 years ago

  • Chirp Version changed from 0.1.12 to 0.2.1

Support for this with the Wouxun radios is in the queue for tomorrow. I'll look at the Baofeng soon.

Actions #3

Updated by Dan Smith over 12 years ago

  • Status changed from New to Closed
  • Target version set to 0.3.0

Fixed for Baofeng UV-3R in r1470 for tomorrow's build

Actions #4

Updated by geoffrey mendelson over 12 years ago

Thank you. It now reads the radio properly, identifies the cross tones, but only shows one of them in the GUI. If you save the file as a CSV file it shows up there.
I have not tried writing to the radio yet.

Am I doing something wrong?

Geoff.

Actions #5

Updated by Dan Smith over 12 years ago

Oops, sorry, forgot to expose that field for the Baofeng. Fixed for tomorrow.

Thanks!

Actions #6

Updated by Dan Smith over 12 years ago

  • Status changed from Closed to In Progress

The 04042012 build is still not right with respect to setting. I hope to have this fixed for tomorrow. Stay tuned...

Actions #7

Updated by Dan Smith over 12 years ago

  • Status changed from In Progress to Closed

Should be good for tomorrow now.

Actions

Also available in: Atom PDF