CHIRP

Hello.
At the beginning I would like to apologize for my poor English. Please add new models of the PUXING PX-2R PLUS transceiver in UHF and VHF versions. They are very similar to the version without PLUS, but have more setting options. Below are the parameters:
RX/TX frequency: VHF version 136-174MHz or UHF version 400-500MHz
RX only frequency: VHF version 400-500MHz or UHF version 136-174MHz
TOT: OFF to 7 min.
Squelch: 0 to 9
VOX gain: OFF to 9
Backlight: Off, Key or Continuous
Channel display: Frequency or Name
PTT-ID: Off, BOT, EOT, Both
DTMF code: can be set manually
Function Key: Lamp, 1750Hz tone, 1450Hz tone, 2315Hz tone or Alarm
Frequency range: can be set manually
Work mode: Frequency or Memory
Key beep: can be set
Power save: can be set
RX/TX can be encoded and/or decoded by CTCSS or DCS tone, inverted or normal
Tuning steps: 5, 6.25, 10, 12.5, 20 or 25 kHz
FM mode: Narrow or Wide
TX power: Low or High
Duplex: Off, Plus, Minus
Offset frequency: can be set manually
In the channel editor you can set 1-128 channels: RX freq., TX freq., CTCSS/DCS decode tone, CTCSS/DCS encode tone, TX power, FM mode and channel name
Additionally have FM receiver 88-108MHz with memory of 0-15 channel.

I am sending the original configuration software in the attachment. It is no longer developed and has many bugs, it often hangs, etc.

Best regards.

Mateusz Stolpe