Bug #7721
Yaesu FT-1900 invalid header
Status: | Closed | Start date: | 03/22/2020 | |
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 0% |
|
Category: | - | |||
Target version: | chirp-daily | |||
Chirp Version: | daily | Platform: | Windows | |
Model affected: | Yaesu FT-1900 |
Description
Chirp communicates with FT1802M but corrupts radio.
will not communicate with FT-2900/1900R.
Therefore cable is OK.
Log attached
Related issues
History
Updated by Ryan Dobbie over 2 years ago
I had this issue a few times, best thing I can say is the cable driver needs refreshed. try unplugging cable then uninstall / reinstall the driver for the cable.
Also watch your timming while accessing the commands for the radio>computer. You have to hit the V/M after selecting <OK> to continue however you have to hit LOW first than <OK> to write.
If these two dont work than I would suggest reinstalling Chirp or getting the software from the G4HFQ Site. 73.
Updated by Bernhard Hailer about 2 years ago
- Status changed from New to Closed
- Target version set to chirp-daily
- Model affected changed from (All models) to Yaesu FT-1900
Duplicates #7025. Please follow and post there. Thanks!