Radio sent incomplete block 0x0f00
I am attempting to "Download From Radio" via CHIRP and I keep receiving this error message: Radio sent incomplete block 0x0f00.
My radio is a Baofeng BF-F8HP.
Any help would be greatly appreciated.
Updated by Bernhard Hailer almost 3 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Model affected changed from (All models) to Baofeng BF-F8HP
This is very likely a cable or cable driver issue. Please refer to these Wiki articles:
CableGuide FTDI OEM Cables
If there's no solution to be found in any of them, please read: How To Report Issues and provide a debug log. Thank you!
If you are using a generic cable with a Prolific chip, you will very likely need to downgrade your driver to version 22.214.171.124.
It can be found at http://www.miklor.com/COM/UV_Drivers.php
Updated by Bernhard Hailer over 2 years ago
- Status changed from Feedback to Closed
No more feedback by submitter.