Project

General

Profile

Actions

Bug #8011

open

ID80H - OUT OF SYNC

Added by leonardo lastrucci over 4 years ago. Updated about 4 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
06/27/2020
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Icom ID-80H
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Erro on writing ID-80E

[2020-06-27 17:23:49,776] chirp.drivers.icf - DEBUG: Waiting for clone result...
[2020-06-27 17:23:50,792] chirp.drivers.icf - ERROR: Out of sync with radio:
000: 80 80 f8 f8 80 f8 80 80 ........
008: 78 78 00 00 00 00 00 00 xx......

[2020-06-27 17:23:50,792] root - ERROR: Failed to communicate with the radio
Traceback (most recent call last):
File "chirp\drivers\icf.pyo", line 407, in clone_to_radio
File "chirp\drivers\icf.pyo", line 392, in _clone_to_radio
File "chirp\drivers\icf.pyo", line 135, in get_frames
File "chirp\drivers\icf.pyo", line 89, in _process_frames
InvalidDataError: Out of sync with radio
[2020-06-27 17:23:50,792] chirp.ui.reporting - DEBUG: Reporting exception
[2020-06-27 17:23:50,792] chirp.ui.common - ERROR: -- Exception: --
[2020-06-27 17:23:50,792] chirp.ui.common - ERROR: Traceback (most recent call last):
File "chirp\ui\clone.pyo", line 254, in run
File "chirp\drivers\icf.pyo", line 667, in sync_out
File "chirp\drivers\icf.pyo", line 410, in clone_to_radio
RadioError: Failed to communicate with the radio: Out of sync with radio

[2020-06-27 17:23:50,792] chirp.ui.common - ERROR: ----------------
[2020-06-27 17:23:50,792] chirp.ui.clone - ERROR: Programmazione fallita: Failed to communicate with the radio: Out of sync with radio
[2020-06-27 17:23:50,855] chirp.ui.clone - DEBUG: Clone thread ended
[2020-06-27 17:23:50,855] chirp.ui.reporting - DEBUG: Reporting model usage: Icom_ID-80H,upload,True
[2020-06-27 17:23:50,855] chirp.ui.reporting - DEBUG: Reporting exception
[2020-06-27 17:23:50,855] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Failed to communicate with the radio: Out of sync with radio ---
[2020-06-27 17:23:50,855] chirp.ui.inputdialog - ERROR: Traceback (most recent call last):
File "chirpw", line 68, in
AttributeError: 'NoneType' object has no attribute 'split'

[2020-06-27 17:23:50,855] chirp.ui.inputdialog - ERROR: ----------------------------


Files

debug.log (38.4 KB) debug.log log leonardo lastrucci, 06/27/2020 08:32 AM
Actions #1

Updated by Bernhard Hailer over 4 years ago

  • Status changed from New to Feedback
  • Target version set to chirp-legacy
  • Model affected changed from ID-80H to Icom ID-80H

Chirp appears to have some problems with Icom radios when the cable uses an FTDI chip. Try a Prolific cable, use a more expensive one with a genuine chip, if you can. Here are some generic bits of information about cables:
CableGuide
CableGuide FTDI OEM Cables
[RTSystemsCablesAndMavericks]
Windows notes: If you are using a generic cable with a Prolific chip, you will very likely need to downgrade your driver to version 3.2.0.0.
It can be found at http://www.miklor.com/COM/UV_Drivers.php
MacOS notes: this OS is apparently very picky about USB to Serial cables. From what I heard, only (genuine) FTDI-based cables can be made work.
You must have the KK7DS Python runtime for Mac OSX installed.
Also see MacOS Tips!
Linux notes: Linux generally is quite good with USB to Serial converter drivers. The most likely cause for grief is a connector which doesn't provide good electrical contact.
Bluetooth notes: connections often suffer from timing issues, please try a cable instead.

Actions #2

Updated by Bernhard Hailer about 4 years ago

The serial code in the Icom driver has recently been reviewed.
Could you please try again and let us know whether this is resolved? Thanks!

Actions

Also available in: Atom PDF