New Model #8313
openBaofeng BF-H7
0%
Description
Add support for Baofeng BF-H7
*.DAT file available.
Software (not native) available and work good (not fully supported, no custom messages, no button assigment - for BF-H6).
Files
Updated by Ilya Tyshchenko over 3 years ago
- File setup.exe added
right software attached (full VHF/UHF support, DTMF, etc).
Updated by Drew Goldsack about 3 years ago
Ilya Tyshchenko wrote:
Add support for Baofeng BF-H7
*.DAT file available.
Software (not native) available and work good (not fully supported, no custom messages, no button assigment - for BF-H6).
Any update on support for the Baofeng BF-H7 radios? I tried the software above but the program crashes when attempting to read from radio. I'm very new to all of this but happy to help if I can!
Updated by Bernhard Hailer about 3 years ago
- Status changed from New to Feedback
Sorry, the third party software files were removed - we don't want to run into copyright trouble.
No news on the BF-H7. The addition of a new radio to Chirp requires two things:
1) a volunteer developer who takes the task to work on this driver,
2) availability of test equipment, such as a loaner radio (see Rules For Loaning A Radio).
Unfortunately, you need to wait until both conditions have been met.
Or, you could decide to get your hands dirty yourself - check Wiki, "Developers".
Updated by Drew Goldsack about 3 years ago
Ok, I’ll look into developer options. Unfortunately I’m not able to provide a radio at this time but could possibly arrange it in the future.
Updated by John Pi almost 2 years ago
A temporary fix would be to use the Radioditty GA-510 setting. It works for Boafeng BF-H7 radio for frequency programming and basic radio settings.