Bug #8513
closedQYT KT8r
100%
Description
Greetings, I'm having trouble programming my KT-8r radio, the chirp replies that it cannot identify the radio.
Files
Updated by Jim Unroe almost 4 years ago
- File btech_with_mc5264.py btech_with_mc5264.py added
- Status changed from New to In Progress
- Priority changed from Urgent to Normal
- Model affected changed from QYT KT8r to QYT KT8R
- Platform changed from Windows to All
Hi Carlos,
Your radio has an MCU Version that CHIRP does not know about. I have a patch ready to submit, but I would like you to test it before I do. Below are the instructions for how to load the attached test driver module for testing.
1 save the test driver module to a convenient location
Note: Do not right click the link to download. Left click the link and choose the "download" link on the page that loads.
2 click "Help" in the menu bar and enable "Enable Developer Functions"
3 click "File" in the menu bar
4 click "Load Module" in the list that appeared and then locate and load the test driver that was saved in step 1
CHIRP will now have a red background. Test to see if you can download from and upload to your radio.
Note: This test driver module does not permanently change your CHIRP installation in any way. If you close CHIRP, you must load this test driver again before you can program your radio.
Let me know the results. If successful, I will submit the patch.
Jim KC9HI
Updated by Jim Unroe almost 4 years ago
- Status changed from In Progress to Resolved
- % Done changed from 0 to 100
Patch submitted. Once approved, support for this additional MCU Version will be available in the following CHIRP daily build.
Jim KC9HI
Updated by Anonymous almost 4 years ago
- Status changed from Resolved to Closed
Applied in changeset commit:e891d4fee13c.