Feature #9265
closedRetevis RT76P all memory
100%
Description
The Retevis rt76p actually has 128 memory channels. Of course this depends on which Retevis firmware you are using. It would be nice to be able to edit the other channels in Chirp instead of having to use the Retevis software.
Files
Updated by Rob Bailey about 2 years ago
The latest firmware for the RT76p --- 20220808 --- brings the 128-channel feature to all radios. Having access to all 128 channels in Chirp would certainly be great.
Updated by Jim Unroe about 2 years ago
- File retevis_rt76p_128_#1.py retevis_rt76p_128_#1.py added
- Status changed from New to In Progress
- Assignee set to Jim Unroe
- Target version set to chirp-legacy
Please test the attached custom driver module to see if it works for your radio.
Here is how you use the custom driver module.
save the custom driver module to a convenient location (DO NOT RIGHT-CLICK THE LINK. Left-click the link and then on the page that loads, left-click the download link near the top left corner.)¶
click Help¶
enable Enable Developer Functions¶
click File¶
click Load Module¶
locate and load custom driver module that was saved in step 1¶
The CHIRP background will now be red to indicate it is running with a externally loaded driver module. You can now test the custom driver module.
Note: The test driver module does not permanently change your CHIRP installation in any way. Every time you load CHIRP you must load this driver module to have access to its fixes or added features.
Jim KC9HI
Updated by Jim Unroe about 2 years ago
- Status changed from In Progress to Resolved
- % Done changed from 0 to 100
Patch submitted. Support will be in the next CHIRP daily build following acceptance.
Jim KC9HI
Updated by Anonymous about 2 years ago
- Status changed from Resolved to Closed
Applied in changeset commit:c9e93254d988.