Project

General

Profile

Actions

New Model #9794

closed

Retevis RB19

Added by Joe Powles over 2 years ago. Updated over 2 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
03/21/2022
Due date:
% Done:

100%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

The software from Retevis works. I just prefer to use chirp. :)

Software download from Retevis is for models RB19 and RB619 so i'm assuming the 619 is very similar firmware, however I do not own a 619.


Files

radtel_t18 rb19_series_draft_#1.py (39.1 KB) radtel_t18 rb19_series_draft_#1.py Rough Draft with RB19, RB19P and RB619 Jim Unroe, 06/13/2022 02:30 AM
Retevis_RB19.img (1.14 KB) Retevis_RB19.img RB19 "factory" image Jim Unroe, 06/15/2022 05:53 PM
Retevis_RB19P.img (1.15 KB) Retevis_RB19P.img RB19P "factory" image Jim Unroe, 06/15/2022 05:53 PM
Retevis_RB619.img (1.15 KB) Retevis_RB619.img RB619 "factory" image Jim Unroe, 06/15/2022 05:53 PM
Actions #1

Updated by Joe Powles over 2 years ago

I had 2 radios hooked up to my computer at once. Pressed download and had the wrong port selected and purely by chance I downloaded the RB19 using RT22S settings in chirp and everything seems to work flawlessly reading and writing to the RB19 using the RT22s Profile.

Actions #2

Updated by Jim Unroe over 2 years ago

Retevis sent me an RB19, RB19P and an RB619. I got a chance to play around with them this evening.

If you would like to test what I have up to this point, enable the "Enable Developer Functions" setting in the Help menu of CHIRP and then use the added Load Module selection the the File menu to locate and load the draft driver module that I have attached to this issue.

To download the draft driver module, left-click the link (right clicking the link will not work). The next page that loads will display the driver module's code. Near the top left of this page there will be a "download" link that you can click to download the draft driver module to your computer.

Note: Loading an external driver module will not permanently change you CHIRP installation. The CHIRP background will turn red to indicate that CHIRP is running with an external driver module loaded.

Jim KC9HI

Updated by Jim Unroe over 2 years ago

These CHIRP Radio Images (@*.img@) files can be included in the CHIRP build for testing purposes.

Jim KC9HI

Actions #4

Updated by Jim Unroe over 2 years ago

  • Status changed from In Progress to Resolved
  • % Done changed from 0 to 100

Patches have been submitted for the Retevis RB19 (FRS), RB19P (GMRS) and RB619 (PMR) radios. Support should be in the next CHIRP daily build following acceptance.

Jim KC9HI

Actions #5

Updated by Anonymous over 2 years ago

  • Status changed from Resolved to Closed

Applied in changeset commit:c965de0b862b.

Actions

Also available in: Atom PDF