Project

General

Profile

Running Under Linux » History » Version 18

Tony Fuller, 03/06/2022 10:51 PM

1 1 Dan Smith
h1. Running CHIRP Under Linux
2
3
{{>toc}}
4
5
CHIRP's preferred platform is Linux. By far the best way to get CHIRP running is to use one of the binary package repositories provided and maintained by volunteers. If you are running an obscure or old distribution, you may need to install it manually from the source tarball.
6
7
h2. Ubuntu package via PPA
8
9
This is super quick and easy if you're running a reasonably new version of Ubuntu. Simply run the following in a terminal:
10
11 10 Tom Hayward
  sudo apt-add-repository ppa:dansmith/chirp-snapshots
12 15 Tony Fuller
sudo add-apt-repository ppa:nrbrtx/python2-stuff  # Older installations of Ubuntu do not need this (20.04 and earlier)
13 1 Dan Smith
sudo apt-get update
14 18 Tony Fuller
sudo apt-get install chirp-daily python-future
15 1 Dan Smith
16 12 Tom Hayward
Look for CHIRP under your distribution's applications menu.
17 1 Dan Smith
18
h2. Fedora package via the D-RATS RPM repository
19
20
This too is quite easy. First, we install the repository RPM and then CHIRP itself. From a terminal:
21
22 3 Dan Smith
  rpm -Uvfh http://d-rats.com/yum/f11/d-rats-repo-0.1.2-1.fc11.noarch.rpm
23 1 Dan Smith
yum install chirp
24
25 2 Dan Smith
Look for CHIRP under your distribution's applications menu.
26 15 Tony Fuller
27
h2. Installing the flatpak (Ubuntu/Debian example)
28
29 17 Tony Fuller
First you will need the flatpak package from your distribution. Check https://www.flatpak.org/setup/ for other distribution instructions
30 15 Tony Fuller
31
  sudo apt install flatpak
32
sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
33
34
Next download the latest flatpak bundle from https://trac.chirp.danplanet.com/chirp_daily/LATEST/
35
It will probably be saved in your Downloads directory so
36
37
  cd ~/Downloads
38
sudo flatpak install chirp-daily-*.flatpak
39
40 16 Tony Fuller
You may need to log in and log out to see CHIRP in your distribution's applications menu.
41
If you can't wait to start CHIRP run
42 15 Tony Fuller
43
  flatpak run com.danplanet.chirp
44 2 Dan Smith
45 1 Dan Smith
h2. Manual installation from source
46
47 2 Dan Smith
If you are here, you are probably running an old or obscure distribution, or you want to run from source for some other reason (such as testing a daily build). Before you start, make sure that the required python modules are installed on your system. Some suggestions on how to do this are:
48
49 16 Tony Fuller
* Ubuntu/Debian: @apt-get install python-gtk python-serial python-libxml2 python-future@
50
* Fedora/RedHat: @yum install pyserial pygtk2 libxml2-python python2-futures@
51 2 Dan Smith
52
Next, grab the source tarball from the [[Download]] page and save it somewhere like your home directory and then unpack it:
53 1 Dan Smith
54
  tar xzf chirp-0.1.12.tar.gz
55
cd chirp-0.1.12
56
57
From here, the easiest thing is to just launch CHIRP directly without installing it onto your system. Don't worry, this works just fine and CHIRP will be fully functional. Simply run the following:
58
59
  ./chirpw
60
61
Once you've tested that it runs on your system, you may want to install it permanently. To do this, run the setup routine by doing:
62
63
  sudo python setup.py install
64
65
When finished, you should be able to run "chirpw" from anywhere on your system, and (with luck) you'll also have an item in your distribution's applications menu.
66 4 Jeff Otterson
67 6 Jens Jensen
h2. serial port permissions
68 7 Jens Jensen
69 16 Tony Fuller
Note that you may need to adjust permissions on the /dev/tty(something) device, or add your users who want to use CHIRP to the "dialout" group in order to let non-privileged users access the serial device.
70 8 Jens Jensen
71
This issue is often indicated by an "access denied" error when accessing serial port.
72 9 Jens Jensen
73 14 Pavel Milanes
On most Linux distros this is accomplished with:
74 9 Jens Jensen
<pre>
75 13 Pavel Milanes
sudo addgroup "$USERNAME" dialout
76 1 Dan Smith
</pre>
77 13 Pavel Milanes
78
You will then need to log out and back in for it to take effect.