Greg Dean
- Registered on: 07/03/2013
- Last sign in: 05/01/2020
Issues
| open | closed | Total | |
|---|---|---|---|
| Assigned issues | 0 | 0 | 0 |
| Reported issues | 0 | 2 | 2 |
Activity
04/30/2020
- 10:23 PM CHIRP Bug #1749: Anytone at5888uv Short Read
- This was 6 years ago. I doubt it is still an issue now. However, I do not have this radio set up to be able to test t...
07/10/2014
- 08:59 PM CHIRP Bug #1749: Anytone at5888uv Short Read
- This is with the last anytone.py that Dan Smith uploaded in a previous Bug
- 08:57 PM CHIRP Bug #1749: Anytone at5888uv Short Read
- This debug is without the anytone.py from a previous bug report.
- 08:53 PM CHIRP Bug #1749 (Closed): Anytone at5888uv Short Read
- Downloading from radio raises "Short read from radio error". I have found no workaround on this site that works
07/03/2013
- 02:13 AM CHIRP Bug #947: Adding R-Code causes "UNSUPPORTED MODEL"
- I forked this from posts that I MADE
- 02:11 AM CHIRP Bug #947 (Closed): Adding R-Code causes "UNSUPPORTED MODEL"
- THis is a forked update from NEW MODEL #901 issue. I thought i would post this as a bug on my own.
I added area re... - 01:56 AM CHIRP New Model #901: uv-b6 no model error
- I just did a Reset to test this out. After resetting the device I then went to R-Code in the menu and set a PL Tone (...
- 01:29 AM CHIRP New Model #901: uv-b6 no model error
- I just experienced this problem as well.
I added area repeaters via Repeater book. These repeaters require a PL to...
Also available in: Atom