Project

General

Profile

Download (46.9 KB)

Bug #8545 » driver_syntax.patch

Matthew Poletiek, 12/14/2020 08:42 PM

View differences:

chirp/drivers/alinco.py
self._mmap = self._download(self._memsize)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
self._upload(self._memsize)
except errors.RadioError:
raise
except Exception, e:
except (Exception, e):
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def get_raw_memory(self, number):
chirp/drivers/anytone.py
try:
radio.pipe.write(data)
radio.pipe.read(len(data))
except Exception, e:
except Exception as e:
LOG.error("Error writing to radio: %s" % e)
raise errors.RadioError("Unable to write to radio")
......
def _read(radio, length):
try:
data = radio.pipe.read(length)
except Exception, e:
except Exception as e:
LOG.error("Error reading from radio: %s" % e)
raise errors.RadioError("Unable to read from radio")
chirp/drivers/anytone_ht.py
def _echo_write(radio, data):
try:
radio.pipe.write(data)
except Exception, e:
except Exception as e:
LOG.error("Error writing to radio: %s" % e)
raise errors.RadioError("Unable to write to radio")
......
def _read(radio, length):
try:
data = radio.pipe.read(length)
except Exception, e:
except Exception as e:
LOG.error("Error reading from radio: %s" % e)
raise errors.RadioError("Unable to read from radio")
......
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ap510.py
data = download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
# _mmap isn't a Chirp MemoryMap, but since AP510Memory implements
......
upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def load_mmap(self, filename):
chirp/drivers/baofeng_common.py
try:
data = _do_ident(radio, magic)
return data
except errors.RadioError, e:
print e
except errors.RadioError as e:
print (e)
error = e
time.sleep(2)
if error:
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
# If anything unexpected happens, make sure we raise
# a RadioError and log the problem
LOG.exception('Unexpected error during upload')
......
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
value = int(val.get_value() * 10)
LOG.debug("Setting fm_presets = %s" % (value))
self._memobj.fm_presets = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/baofeng_uv3r.py
for _i in range(0, 10):
try:
return _uv3r_prep(radio)
except errors.RadioError, e:
except errors.RadioError as e:
time.sleep(1)
raise e
......
return do_download(radio, 0x0000, 0x0E40, 0x0010)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
return do_upload(radio, 0x0000, 0x0E40, 0x0010)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
LOG.debug("Setting fm_presets[%1i] = %s" % (index, value))
setting = self._memobj.fm_presets
setting[index] = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/bf-t1.py
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Error sending Magic to radio:\n%s" % e)
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Error: %s" % e)
def _decode_tone(self, val, inv):
......
setattr(_settings, name, value)
LOG.debug("Setting %s: %s" % (name, value))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/bj9900.py
self._mmap = self._clone_in()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
self._clone_out()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def process_mmap(self):
chirp/drivers/bjuv55.py
value = int(val.get_value() * 10 - 870)
LOG.debug("Setting fm_preset = %s" % (value))
self._memobj.fm_preset = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/fd268.py
obj = getattr(_mem, sett)
setattr(obj, name, element.value)
except AttributeError, e:
except AttributeError as e:
m = "Setting %s is not in this setting block" % name
LOG.debug(m)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft1d.py
except AttributeError as e:
LOG.error("Setting %s is not in the memory map: %s" %
(element.get_name(), e))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft2800.py
self._mmap = _download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Downloaded in %.2f sec" % (time.time() - start))
self.process_mmap()
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Uploaded in %.2f sec" % (time.time() - start))
chirp/drivers/ft2900.py
self._mmap = _download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Downloaded in %.2f sec" % (time.time() - start))
self.process_mmap()
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Uploaded in %.2f sec" % (time.time() - start))
......
setattr(_settings, name, value)
LOG.debug("Setting %s: %s" % (name, value))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft450d.py
self._mmap = self._clone_in()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s"
% e)
self.process_mmap()
......
self._clone_out()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s"
% e)
......
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft50.py
def _clone_out(radio):
try:
return __clone_out(radio)
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with the radio: %s" % e)
chirp/drivers/ft60.py
self._mmap = _download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
self.check_checksums()
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def process_mmap(self):
......
setattr(_settings, name, value)
LOG.debug("Setting %s: %s" % (name, value))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft70.py
except AttributeError as e:
LOG.error("Setting %s is not in the memory map: %s" %
(element.get_name(), e))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft7100.py
self._mmap = _download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Downloaded in %.2f sec", (time.time() - start))
self.process_mmap()
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
LOG.info("Uploaded in %.2f sec", (time.time() - start))
......
setattr(_overlay, name, value)
LOG.debug("Setting %s: %s", name, value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ft8100.py
if _mem.duplex == DUPLEX.index("split"):
tx_freq = int(_mem.offset) * 1000
print self.VARIANT, number, tx_freq, mem.freq
print (self.VARIANT, number, tx_freq, mem.freq)
mem.offset = tx_freq - mem.freq
else:
mem.offset = int(_mem.offset) * 1000
......
if not self._memobj.enables[byte] & bit and number != 1:
mem.empty = True
print 'R', self.VARIANT, number, _mem.baud9600
print ('R', self.VARIANT, number, _mem.baud9600)
return mem
......
def _clone_out(radio):
try:
return __clone_out(radio)
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with the radio: %s" % e)
......
pos = 0
for block in radio._block_lengths:
if os.getenv("CHIRP_DEBUG"):
print "\nSending %i-%i" % (pos, pos + block)
print ("\nSending %i-%i" % (pos, pos + block))
out = radio.get_mmap()[pos:pos + block]
# need to chew byte-by-byte here or else we lose the ACK...not sure why
......
pos += block
print "Clone completed in %i seconds" % (time.time() - start)
print ("Clone completed in %i seconds" % (time.time() - start))
return True
chirp/drivers/ft90.py
self._mmap = self._clone_in()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
trace = traceback.format_exc()
raise errors.RadioError(
"Failed to communicate with radio: %s" % trace)
......
self._clone_out()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
trace = traceback.format_exc()
raise errors.RadioError(
"Failed to communicate with radio: %s" % trace)
......
newval = self._dtmf2bbcd(newval)
LOG.debug("Setting %s(%s) <= %s" % (setting, oldval, newval))
setattr(_settings, setting, newval)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/ftm350.py
self._mmap = _clone_in(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to download from radio (%s)" % e)
self.process_mmap()
......
_clone_out(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to upload to radio (%s)" % e)
def process_mmap(self):
chirp/drivers/kguv8d.py
self._mmap = self._download()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
return self._do_download(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
LOG.exception('Unknown error during download process')
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
self._do_upload(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
return
chirp/drivers/kguv8dplus.py
self._mmap = self._download()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
return self._do_download(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
LOG.exception('Unknown error during download process')
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
self._do_upload(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
return
......
setattr(obj, setting, int(element.value)/10)
else:
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
def _is_freq(self, element):
return "rxfreq" in element.get_name() or "txoffset" in element.get_name() or "rx_start" in element.get_name() or "rx_stop" in element.get_name() or "tx_start" in element.get_name() or "tx_stop" in element.get_name()
return "rxfreq" in element.get_name() or "txoffset" in element.get_name() or "rx_start" in element.get_name() or "rx_stop" in element.get_name() or "tx_start" in element.get_name() or "tx_stop" in element.get_name()
chirp/drivers/kguv8e.py
try:
self.pipe.write(_header)
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def _read_record(self):
......
self._mmap = self._download()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
return self._do_download(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
LOG.exception('Unknown error during download process')
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
self._do_upload(0, 32768, 64)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
return
......
setattr(obj, setting, int(element.value)/10)
else:
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/kguv9dplus.py
self._write_record(CMD_HANGUP)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
LOG.exception('Unknown error during download process')
raise errors.RadioError(
"Failed to communicate with radio: %s" % e)
......
self._write_record(CMD_HANGUP)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError(
"Failed to communicate with radio: %s" % e)
return
......
setattr(obj, setting, int(element.value)/10)
else:
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug("set_settings: Exception with %s" %
element.get_name())
raise
chirp/drivers/kyd.py
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/kyd_IP620.py
self.pipe.write("\x06")
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Radio refused to exit programming mode: %s" % e)
def _ip620_enter_programming_mode(self):
......
_ack = self.pipe.read(1)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Error communicating with radio: %s" % e)
if not _ack:
raise errors.RadioError("No response from radio")
......
_ident = self.pipe.read(8)
except errors.RadioError:
raise
except Exception, e:
except xception as e:
raise errors.RadioError("Error communicating with radio: %s" % e)
if not _ident.startswith("\x06\x4B\x47\x36\x37\x01\x56\xF8"):
print util.hexprint(_ident)
print (util.hexprint(_ident))
raise errors.RadioError("Radio returned unknown identification string")
try:
self.pipe.write(CMD_ACK)
_ack = self.pipe.read(1)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Error communicating with radio: %s" % e)
if _ack != CMD_ACK:
raise errors.RadioError("Radio refused to enter programming mode")
......
self._mmap = self._do_download()
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
setattr(self._memobj.settings_misc,
element.get_name(),
element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
setattr(_settings_misc, setting, newval)
else:
setattr(_settings, setting, newval)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/leixen.py
# util.hexprint(frame).replace("\n", "\n ")))
try:
radio.pipe.write(frame)
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
def sync_in(self):
try:
self._mmap = do_download(self)
except Exception, e:
except Exception as e:
finish(self)
raise errors.RadioError("Failed to download from radio: %s" % e)
self.process_mmap()
......
except errors.RadioError:
finish(self)
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to upload to radio: %s" % e)
def get_raw_memory(self, number):
......
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/lt725uv.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/puxing.py
for _i in range(0, 10):
try:
return _puxing_prep(radio)
except Exception, e:
except Exception as e:
time.sleep(1)
raise e
......
return do_download(radio, 0x0000, 0x0C60, 0x0008)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
return do_upload(radio, 0x0000, 0x0C40, 0x0008)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00),
......
return do_download(radio, 0x0000, 0x0FE0, 0x0010)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
......
return do_upload(radio, 0x0000, 0x0FE0, 0x0010)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
PUXING_2R_MEM_FORMAT = """
chirp/drivers/radioddity_r2.py
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/radtel_t18.py
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/retevis_rt1.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/retevis_rt21.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/retevis_rt22.py
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/retevis_rt23.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/retevis_rt26.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/rfinder.py
dist = distance(self.__lat, self.__lon, lat, lon)
bear = fuzzy_to(self.__lat, self.__lon, lat, lon)
mem.comment = "(%imi %s) %s" % (dist, bear, mem.comment)
except Exception, e:
except Exception as e:
LOG.error("Failed to calculate distance: %s" % e)
return mem
......
mem.number = number
number += 1
self.__memories.append(mem)
except Exception, e:
except Exception as e:
import traceback
LOG.error(traceback.format_exc())
LOG.error("Error in received data, cannot continue")
......
self._rfp = None
def set_params(self, (lat, lon), miles, email, password):
def set_params(self, lat, lon, miles, email, password):
"""Sets the parameters to use for the query"""
self._lat = lat
self._lon = lon
chirp/drivers/rh5r_v2.py
filedata[0x840:0x848] == cls._FILEID)
def process_mmap(self):
print MEM_FORMAT
print (MEM_FORMAT)
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
def get_raw_memory(self, number):
chirp/drivers/tdxone_tdq8a.py
try:
data = _do_ident(radio, magic)
return data
except errors.RadioError, e:
print e
except errors.RadioError as e:
print (e)
error = e
time.sleep(2)
if error:
......
if len(data) == 0x2008:
rid = data[0x2000:0x2008]
print rid
print (rid)
return rid.startswith(cls.MODEL)
else:
return False
......
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
value = int(val.get_value() * 10)
LOG.debug("Setting fm_presets = %s" % (value))
self._memobj.fm_presets = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/th7800.py
LOG.debug("Setting %s(%s) <= %s" % (setting, oldval, newval))
setattr(_settings, setting, newval)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
def sync_in(self):
try:
self._mmap = _download(self)
except Exception, e:
except Exception as e:
raise errors.RadioError(
"Failed to communicate with the radio: %s" % e)
self.process_mmap()
......
def sync_out(self):
try:
_upload(self)
except Exception, e:
except Exception as e:
raise errors.RadioError(
"Failed to communicate with the radio: %s" % e)
chirp/drivers/th9000.py
try:
radio.pipe.write(data)
radio.pipe.read(len(data))
except Exception, e:
except Exception as e:
LOG.error("Error writing to radio: %s" % e)
raise errors.RadioError("Unable to write to radio")
......
def _read(radio, length):
try:
data = radio.pipe.read(length)
except Exception, e:
except Exception as e:
LOG.error( "Error reading from radio: %s" % e)
raise errors.RadioError("Unable to read from radio")
......
else:
LOG.debug( "Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug( element.get_name())
raise
chirp/drivers/th9800.py
LOG.debug("Setting %s(%s) <= %s" % (setting, oldval, newval))
setattr(_settings, setting, newval)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
def sync_in(self):
try:
self._mmap = _download(self)
except Exception, e:
except Exception as e:
raise errors.RadioError(
"Failed to communicate with the radio: %s" % e)
self.process_mmap()
......
def sync_out(self):
try:
_upload(self)
except Exception, e:
except Exception as e:
raise errors.RadioError(
"Failed to communicate with the radio: %s" % e)
chirp/drivers/th_uv8000.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/thd72.py
except AttributeError as e:
LOG.error("Setting %s is not in the memory map: %s" %
(element.get_name(), e))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
return r
def usage():
print "Usage: %s <-i input.img>|<-o output.img> -p port " \
print ("Usage: %s <-i input.img>|<-o output.img> -p port " \
"[[-f first-addr] [-l last-addr] | [-b list,of,blocks]]" % \
sys.argv[0]
sys.argv[0])
sys.exit(1)
opts, args = getopt.getopt(sys.argv[1:], "i:o:p:f:l:b:")
......
else:
r._mmap = file(fname, "rb").read(r._memsize)
r.upload(blocks)
print "\nDone"
print ("\nDone")
chirp/drivers/thuv1f.py
self._mmap = uvf1_download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()
......
uvf1_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
@classmethod
chirp/drivers/tk760g.py
do_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def process_mmap(self):
chirp/drivers/ts2000.py
duplex = 0
offset = 0
else:
print "Bug: unsupported duplex `%s'" % mem.duplex
print ("Bug: unsupported duplex `%s'" % mem.duplex)
if mem.mode in ["AM", "FM"]:
step = TS2000_FM_STEPS.index(mem.tuning_step)
else:
......
elif mem.duplex == "split":
duplex = 0
else:
print "Bug: unsupported duplex `%s'" % mem.duplex
print ("Bug: unsupported duplex `%s'" % mem.duplex)
if mem.mode in ["AM", "FM"]:
step = TS2000_FM_STEPS.index(mem.tuning_step)
else:
chirp/drivers/ts480.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
return
chirp/drivers/ts590.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/vgc.py
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
chirp/drivers/vxa700.py
self._mmap = _download(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate " +
"with the radio: %s" % e)
self.process_mmap()
......
_upload(self)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate " +
"with the radio: %s" % e)
chirp/drivers/wouxun.py
return do_download(self, 0x0000, 0x2000, 0x0040)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def _upload(self):
......
return do_upload(self, 0x0000, 0x2000, 0x0010)
except errors.RadioError:
raise
except Exception, e:
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
def sync_in(self):
......
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
else:
setting = self._memobj.fm_presets_1
setting[index] = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
setattr(self._memobj.freq_ranges,
element.get_name(),
encode_freq(int(element.value)))
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
else:
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
......
else:
setting = self._memobj.fm_presets_1
setting[index] = value
except Exception, e:
except Exception as e:
LOG.debug(element.get_name())
raise
(2-2/2)
Copyright 2023 CHIRP Software LLC