|
# Copyright 2015 David Fannin KK6DF <kk6df@arrl.org>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import os
|
|
import struct
|
|
import time
|
|
import logging
|
|
|
|
from chirp import bitwise
|
|
from chirp import chirp_common
|
|
from chirp import directory
|
|
from chirp import errors
|
|
from chirp import memmap
|
|
from chirp import util
|
|
from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \
|
|
RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettingValueFloat, InvalidValueError
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
#
|
|
# Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios)
|
|
#
|
|
# Version 1.0
|
|
#
|
|
# - Skip channels
|
|
#
|
|
# Global Parameters
|
|
#
|
|
MMAPSIZE = 16384
|
|
TONES = [62.5] + list(chirp_common.TONES)
|
|
TMODES = ['','Tone','DTCS','']
|
|
DUPLEXES = ['','err','-','+'] # index 2 not used
|
|
MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw
|
|
TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9
|
|
POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65),
|
|
chirp_common.PowerLevel("Mid", watts=25),
|
|
chirp_common.PowerLevel("Low", watts=10)]
|
|
|
|
CROSS_MODES = chirp_common.CROSS_MODES
|
|
|
|
APO_LIST = [ "Off","30 min","1 hr","2 hrs" ]
|
|
BGCOLOR_LIST = ["Blue","Orange","Purple"]
|
|
BGBRIGHT_LIST = ["%s" % x for x in range(1,32)]
|
|
SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)]
|
|
TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)]
|
|
TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting
|
|
TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"]
|
|
BEEP_LIST = ["Off","On"]
|
|
|
|
SETTING_LISTS = {
|
|
"auto_power_off": APO_LIST,
|
|
"bg_color" : BGCOLOR_LIST,
|
|
"bg_brightness" : BGBRIGHT_LIST,
|
|
"squelch" : SQUELCH_LIST,
|
|
"timeout_timer" : TIMEOUT_LIST,
|
|
"choose_tx_power": TXPWR_LIST,
|
|
"tbst_freq" : TBSTFREQ_LIST,
|
|
"voice_prompt" : BEEP_LIST
|
|
}
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0000;
|
|
struct {
|
|
u8 unknown0000[16];
|
|
char idhdr[16];
|
|
u8 unknown0001[16];
|
|
} fidhdr;
|
|
"""
|
|
#Overall Memory Map:
|
|
#
|
|
# Memory Map (Range 0x0100-3FF0, step 0x10):
|
|
#
|
|
# Field Start End Size
|
|
# (hex) (hex) (hex)
|
|
#
|
|
# 1 Channel Set Flag 0100 011F 20
|
|
# 2 Channel Skip Flag 0120 013F 20
|
|
# 3 Blank/Unknown 0140 01EF B0
|
|
# 4 Unknown 01F0 01FF 10
|
|
# 5 TX/RX Range 0200 020F 10
|
|
# 6 Bootup Passwd 0210 021F 10
|
|
# 7 Options, Radio 0220 023F 20
|
|
# 8 Unknown 0240 019F
|
|
# 8B Startup Label 03E0 03E7 07
|
|
# 9 Channel Bank 2000 38FF 1900
|
|
# Channel 000 2000 201F 20
|
|
# Channel 001 2020 202F 20
|
|
# ...
|
|
# Channel 199 38E0 38FF 20
|
|
# 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792
|
|
# Total Map Size 16128 (2^8 = 16384)
|
|
#
|
|
# TH9000/220 memory map
|
|
# section: 1 and 2: Channel Set/Skip Flags
|
|
#
|
|
# Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active.
|
|
# Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active.
|
|
#
|
|
# Both flag maps are a total 24 bytes in length, aligned on 32 byte records.
|
|
# bit = 0 channel set/no skip, 1 is channel not set/skip
|
|
#
|
|
# to index a channel:
|
|
# cbyte = channel / 8 ;
|
|
# cbit = channel % 8 ;
|
|
# setflag = csetflag[cbyte].c[cbit] ;
|
|
# skipflag = cskipflag[cbyte].c[cbit] ;
|
|
#
|
|
# channel range is 0-199, range is 32 bytes (last 7 unknown)
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x0100;
|
|
struct {
|
|
bit c[8];
|
|
} csetflag[32];
|
|
|
|
struct {
|
|
u8 unknown0100[7];
|
|
} ropt0100;
|
|
|
|
#seekto 0x0120;
|
|
struct {
|
|
bit c[8];
|
|
} cskipflag[32];
|
|
|
|
struct {
|
|
u8 unknown0120[7];
|
|
} ropt0120;
|
|
"""
|
|
# TH9000 memory map
|
|
# section: 5 TX/RX Range
|
|
# used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter)
|
|
# possible to set range for tx/rx
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x0200;
|
|
struct {
|
|
bbcd txrangelow[4];
|
|
bbcd txrangehi[4];
|
|
bbcd rxrangelow[4];
|
|
bbcd rxrangehi[4];
|
|
} freqrange;
|
|
"""
|
|
# TH9000 memory map
|
|
# section: 6 bootup_passwd
|
|
# used to set bootup passwd (see boot_passwd checkbox option)
|
|
#
|
|
# options - bootup password
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set
|
|
# 10 u8 unknown;
|
|
#
|
|
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x0210;
|
|
struct {
|
|
u8 bootup_passwd[6];
|
|
u8 unknown2010[10];
|
|
} ropt0210;
|
|
"""
|
|
# TH9000/220 memory map
|
|
# section: 7 Radio Options
|
|
# used to set a number of radio options
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr)
|
|
# 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1
|
|
# 1 u8 unknown;
|
|
# 1 u8 squelch; squelch level, range 0-19, hex for menu
|
|
# 1 u8 unknown[2];
|
|
# 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0
|
|
# 1 u8 unknown;
|
|
# 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index
|
|
# 1 u8 unknown;
|
|
# 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2
|
|
# 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz
|
|
# 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout
|
|
# 1 u8 unknown;
|
|
# 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index
|
|
# 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2
|
|
#
|
|
# description of function setup options, starting at 0x0230
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 1 u8 // 0
|
|
# :4 unknown:6
|
|
# :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked)
|
|
# :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index
|
|
# 2 u8 unknown[2] /1-2
|
|
# 1 u8 // 3
|
|
# :4 unknown:4
|
|
# :1 inhibit_init_ops:1 //bit 5
|
|
# :1 unknownD:1
|
|
# :1 inhibit_setup_bg_chk:1 //bit 7
|
|
# :1 unknown:1
|
|
# 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4
|
|
# 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5
|
|
# 2 u8 unknown[2]; // 6-7
|
|
# 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8
|
|
# 7 u8 unknown[7]; // 9-F
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x0220;
|
|
struct {
|
|
u8 display_mode;
|
|
u8 vfo_mr;
|
|
u8 unknown0220A;
|
|
u8 squelch;
|
|
u8 unknown0220B[2];
|
|
u8 channel_lock;
|
|
u8 unknown0220C;
|
|
u8 bg_brightness;
|
|
u8 unknown0220D;
|
|
u8 bg_color;
|
|
u8 tbst_freq;
|
|
u8 timeout_timer;
|
|
u8 unknown0220E;
|
|
u8 auto_power_off;
|
|
u8 voice_prompt;
|
|
u8 unknown0230A:6,
|
|
elim_sql_tail:1,
|
|
sql_key_function:1;
|
|
u8 unknown0230B[2];
|
|
u8 unknown0230C:4,
|
|
inhibit_init_ops:1,
|
|
unknown0230D:1,
|
|
inhibit_setup_bg_chk:1,
|
|
unknown0230E:1;
|
|
u8 tail_elim_type;
|
|
u8 choose_tx_power;
|
|
u8 unknown0230F[2];
|
|
u8 bootup_passwd_flag;
|
|
u8 unknown0230G[7];
|
|
} settings;
|
|
"""
|
|
# TH9000 memory map
|
|
# section: 8B Startup Label
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 7 char start_label[7] label displayed at startup (usually your call sign)
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x03E0;
|
|
struct {
|
|
char startname[7];
|
|
} slabel;
|
|
"""
|
|
# TH9000/220 memory map
|
|
# section: 9 Channel Bank
|
|
# description of channel bank (200 channels , range 0-199)
|
|
# Each 32 Byte (0x20 hex) record:
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 4 bbcd freq[4] receive frequency in packed binary coded decimal
|
|
# 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field)
|
|
# 1 u8
|
|
# :4 unknown:4
|
|
# :4 tuning_step:4 tuning step, menu index value from 0-9
|
|
# 5,6.25,8.33,10,12.5,15,20,25,30,50
|
|
# 1 u8
|
|
# :4 unknown:4 not yet decoded, used for DCS coding?
|
|
# :2 channel_width:2 channel spacing, menu index value from 0-3
|
|
# 25,20,12.5
|
|
# :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs)
|
|
# :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit
|
|
# 1 u8
|
|
# :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater)
|
|
# :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option)
|
|
# :2 unknown:2
|
|
# :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo
|
|
# :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field)
|
|
#
|
|
# 1 u8
|
|
# :4 unknown:4
|
|
# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone)
|
|
# :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone)
|
|
# 1 u8
|
|
# :2 unknown:2
|
|
# :6 txtone:6 tx ctcss tone, menu index
|
|
# 1 u8
|
|
# :2 unknown:2
|
|
# :6 rxtone:6 rx ctcss tone, menu index
|
|
# 1 u8 txcode ?, not used for ctcss
|
|
# 1 u8 rxcode ?, not used for ctcss
|
|
# 3 u8 unknown[3]
|
|
# 7 char name[7] 7 byte char string for channel name
|
|
# 1 u8
|
|
# :6 unknown:6,
|
|
# :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy)
|
|
# 4 u8 unknownI[4];
|
|
# 1 u8
|
|
# :7 unknown:7
|
|
# :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option)
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x2000;
|
|
struct {
|
|
bbcd freq[4];
|
|
bbcd offset[4];
|
|
u8 unknown2000A:4,
|
|
tuning_step:4;
|
|
u8 rxdcsextra:1,
|
|
txdcsextra:1,
|
|
rxinv:1,
|
|
txinv:1,
|
|
channel_width:2,
|
|
reverse:1,
|
|
txoff:1;
|
|
u8 talkaround:1,
|
|
compander:1,
|
|
unknown2000C:2,
|
|
power:2,
|
|
duplex:2;
|
|
u8 unknown2000D:4,
|
|
rxtmode:2,
|
|
txtmode:2;
|
|
u8 unknown2000E:2,
|
|
txtone:6;
|
|
u8 unknown2000F:2,
|
|
rxtone:6;
|
|
u8 txcode;
|
|
u8 rxcode;
|
|
u8 unknown2000G[3];
|
|
char name[7];
|
|
u8 unknown2000H:6,
|
|
busychannellockout:2;
|
|
u8 unknown2000I[4];
|
|
u8 unknown2000J:7,
|
|
scrambler:1;
|
|
} memory[200] ;
|
|
"""
|
|
|
|
def _echo_write(radio, data):
|
|
try:
|
|
radio.pipe.write(data)
|
|
radio.pipe.read(len(data))
|
|
except Exception, e:
|
|
LOG.error("Error writing to radio: %s" % e)
|
|
raise errors.RadioError("Unable to write to radio")
|
|
|
|
|
|
def _checksum(data):
|
|
cs = 0
|
|
for byte in data:
|
|
cs += ord(byte)
|
|
return cs % 256
|
|
|
|
def _read(radio, length):
|
|
try:
|
|
data = radio.pipe.read(length)
|
|
except Exception, e:
|
|
LOG.error( "Error reading from radio: %s" % e)
|
|
raise errors.RadioError("Unable to read from radio")
|
|
|
|
if len(data) != length:
|
|
LOG.error( "Short read from radio (%i, expected %i)" % (len(data),
|
|
length))
|
|
LOG.debug(util.hexprint(data))
|
|
raise errors.RadioError("Short read from radio")
|
|
return data
|
|
|
|
|
|
|
|
def _ident(radio):
|
|
radio.pipe.timeout = 1
|
|
_echo_write(radio,"PROGRAM")
|
|
response = radio.pipe.read(3)
|
|
if response != "QX\06":
|
|
LOG.debug( "Response was :\n%s" % util.hexprint(response))
|
|
raise errors.RadioError("Unsupported model")
|
|
_echo_write(radio, "\x02")
|
|
response = radio.pipe.read(16)
|
|
LOG.debug(util.hexprint(response))
|
|
if response[1:8] != "TH-9000":
|
|
LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000"))
|
|
LOG.error( "Response was:\n%s" % util.hexprint(response))
|
|
raise errors.RadioError("Unsupported model")
|
|
|
|
def _send(radio, cmd, addr, length, data=None):
|
|
frame = struct.pack(">cHb", cmd, addr, length)
|
|
if data:
|
|
frame += data
|
|
frame += chr(_checksum(frame[1:]))
|
|
frame += "\x06"
|
|
_echo_write(radio, frame)
|
|
LOG.debug("Sent:\n%s" % util.hexprint(frame))
|
|
if data:
|
|
result = radio.pipe.read(1)
|
|
if result != "\x06":
|
|
LOG.debug( "Ack was: %s" % repr(result))
|
|
raise errors.RadioError("Radio did not accept block at %04x" % addr)
|
|
return
|
|
result = _read(radio, length + 6)
|
|
LOG.debug("Got:\n%s" % util.hexprint(result))
|
|
header = result[0:4]
|
|
data = result[4:-2]
|
|
ack = result[-1]
|
|
if ack != "\x06":
|
|
LOG.debug("Ack was: %s" % repr(ack))
|
|
raise errors.RadioError("Radio NAK'd block at %04x" % addr)
|
|
_cmd, _addr, _length = struct.unpack(">cHb", header)
|
|
if _addr != addr or _length != _length:
|
|
LOG.debug( "Expected/Received:")
|
|
LOG.debug(" Length: %02x/%02x" % (length, _length))
|
|
LOG.debug( " Addr: %04x/%04x" % (addr, _addr))
|
|
raise errors.RadioError("Radio send unexpected block")
|
|
cs = _checksum(result[1:-2])
|
|
if cs != ord(result[-2]):
|
|
LOG.debug( "Calculated: %02x" % cs)
|
|
LOG.debug( "Actual: %02x" % ord(result[-2]))
|
|
raise errors.RadioError("Block at 0x%04x failed checksum" % addr)
|
|
return data
|
|
|
|
|
|
def _finish(radio):
|
|
endframe = "\x45\x4E\x44"
|
|
_echo_write(radio, endframe)
|
|
result = radio.pipe.read(1)
|
|
# TYT radios acknowledge the "endframe" command, Luiton radios do not.
|
|
if result != "" and result != "\x06":
|
|
LOG.error( "Got:\n%s" % util.hexprint(result))
|
|
raise errors.RadioError("Radio did not finish cleanly")
|
|
|
|
def do_download(radio):
|
|
|
|
_ident(radio)
|
|
|
|
_memobj = None
|
|
data = ""
|
|
|
|
for start,end in radio._ranges:
|
|
for addr in range(start,end,0x10):
|
|
block = _send(radio,'R',addr,0x10)
|
|
data += block
|
|
status = chirp_common.Status()
|
|
status.cur = len(data)
|
|
status.max = end
|
|
status.msg = "Downloading from radio"
|
|
radio.status_fn(status)
|
|
|
|
_finish(radio)
|
|
|
|
return memmap.MemoryMap(data)
|
|
|
|
def do_upload(radio):
|
|
|
|
_ident(radio)
|
|
|
|
for start,end in radio._ranges:
|
|
for addr in range(start,end,0x10):
|
|
if addr < 0x0100:
|
|
continue
|
|
block = radio._mmap[addr:addr+0x10]
|
|
_send(radio,'W',addr,len(block),block)
|
|
status = chirp_common.Status()
|
|
status.cur = addr
|
|
status.max = end
|
|
status.msg = "Uploading to Radio"
|
|
radio.status_fn(status)
|
|
|
|
_finish(radio)
|
|
|
|
|
|
|
|
#
|
|
# The base class, extended for use with other models
|
|
#
|
|
class Th9000Radio(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""TYT TH-9000"""
|
|
VENDOR = "TYT"
|
|
MODEL = "TH9000 Base"
|
|
BAUD_RATE = 9600
|
|
valid_freq = [(900000000, 999000000)]
|
|
|
|
|
|
_memsize = MMAPSIZE
|
|
_ranges = [(0x0000,0x4000)]
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = ("The TYT TH-9000 driver is an beta version."
|
|
"Proceed with Caution and backup your data")
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_cross = True
|
|
rf.has_tuning_step = False
|
|
rf.has_rx_dtcs = True
|
|
rf.valid_skips = ["","S"]
|
|
rf.memory_bounds = (0, 199)
|
|
rf.valid_name_length = 7
|
|
rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-"
|
|
rf.valid_modes = MODES
|
|
rf.valid_tmodes = ['','Tone','TSQL','DTCS','Cross']
|
|
rf.valid_cross_modes = ['Tone->DTCS','DTCS->Tone',
|
|
'->Tone','->DTCS','Tone->Tone']
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES
|
|
rf.valid_bands = self.valid_freq
|
|
return rf
|
|
|
|
# Do a download of the radio from the serial port
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
|
|
# Do an upload of the radio to the serial port
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
|
|
# Return a raw representation of the memory object, which
|
|
# is very helpful for development
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number])
|
|
|
|
# not working yet
|
|
def _get_dcs_index(self, _mem,which):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
return (int(extra) << 8) | int(base)
|
|
|
|
def _set_dcs_index(self, _mem, which, index):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
base.set_value(index & 0xFF)
|
|
extra.set_value(index >> 8)
|
|
|
|
|
|
# Extract a high-level memory object from the low-level memory map
|
|
# This is called to populate a memory in the UI
|
|
def get_memory(self, number):
|
|
# Get a low-level memory object mapped to the image
|
|
_mem = self._memobj.memory[number]
|
|
|
|
# get flag info
|
|
cbyte = number / 8 ;
|
|
cbit = 7 - (number % 8) ;
|
|
setflag = self._memobj.csetflag[cbyte].c[cbit];
|
|
skipflag = self._memobj.cskipflag[cbyte].c[cbit];
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
mem.number = number # Set the memory number
|
|
|
|
if setflag == 1:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.freq) * 100
|
|
mem.offset = int(_mem.offset) * 100
|
|
mem.name = str(_mem.name).rstrip() # Set the alpha tag
|
|
mem.duplex = DUPLEXES[_mem.duplex]
|
|
mem.mode = MODES[_mem.channel_width]
|
|
mem.power = POWER_LEVELS[_mem.power]
|
|
|
|
rxtone = txtone = None
|
|
|
|
|
|
rxmode = TMODES[_mem.rxtmode]
|
|
txmode = TMODES[_mem.txtmode]
|
|
|
|
|
|
|
|
# doesn't work
|
|
if rxmode == "Tone":
|
|
rxtone = TONES[_mem.rxtone]
|
|
elif rxmode == "DTCS":
|
|
rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')]
|
|
|
|
if txmode == "Tone":
|
|
txtone = TONES[_mem.txtone]
|
|
elif txmode == "DTCS":
|
|
txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')]
|
|
|
|
rxpol = _mem.rxinv and "R" or "N"
|
|
txpol = _mem.txinv and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem,
|
|
(txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol))
|
|
|
|
mem.skip = "S" if skipflag == 1 else ""
|
|
|
|
|
|
# We'll consider any blank (i.e. 0MHz frequency) to be empty
|
|
if mem.freq == 0:
|
|
mem.empty = True
|
|
|
|
return mem
|
|
|
|
# Store details about a high-level memory to the memory map
|
|
# This is called when a user edits a memory in the UI
|
|
def set_memory(self, mem):
|
|
# Get a low-level memory object mapped to the image
|
|
|
|
_mem = self._memobj.memory[mem.number]
|
|
|
|
cbyte = mem.number / 8
|
|
cbit = 7 - (mem.number % 8)
|
|
|
|
if mem.empty:
|
|
self._memobj.csetflag[cbyte].c[cbit] = 1
|
|
self._memobj.cskipflag[cbyte].c[cbit] = 1
|
|
return
|
|
|
|
self._memobj.csetflag[cbyte].c[cbit] = 0
|
|
self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0
|
|
|
|
_mem.set_raw("\x00" * 32)
|
|
|
|
_mem.freq = mem.freq / 100 # Convert to low-level frequency
|
|
_mem.offset = mem.offset / 100 # Convert to low-level frequency
|
|
|
|
_mem.name = mem.name.ljust(7)[:7] # Store the alpha tag
|
|
_mem.duplex = DUPLEXES.index(mem.duplex)
|
|
|
|
|
|
try:
|
|
_mem.channel_width = MODES.index(mem.mode)
|
|
except ValueError:
|
|
_mem.channel_width = 0
|
|
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
_mem.txtmode = TMODES.index(txmode)
|
|
|
|
_mem.rxtmode = TMODES.index(rxmode)
|
|
|
|
if txmode == "Tone":
|
|
_mem.txtone = TONES.index(txtone)
|
|
elif txmode == "DTCS":
|
|
self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone))
|
|
|
|
if rxmode == "Tone":
|
|
_mem.rxtone = TONES.index(rxtone)
|
|
elif rxmode == "DTCS":
|
|
self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone))
|
|
|
|
_mem.txinv = txpol == "R"
|
|
_mem.rxinv = rxpol == "R"
|
|
|
|
|
|
if mem.power:
|
|
_mem.power = POWER_LEVELS.index(mem.power)
|
|
else:
|
|
_mem.power = 0
|
|
|
|
def _get_settings(self):
|
|
_settings = self._memobj.settings
|
|
_freqrange = self._memobj.freqrange
|
|
_slabel = self._memobj.slabel
|
|
|
|
basic = RadioSettingGroup("basic","Global Settings")
|
|
freqrange = RadioSettingGroup("freqrange","Frequency Ranges")
|
|
top = RadioSettingGroup("top","All Settings",basic,freqrange)
|
|
settings = RadioSettings(top)
|
|
|
|
def _filter(name):
|
|
filtered = ""
|
|
for char in str(name):
|
|
if char in chirp_common.CHARSET_ASCII:
|
|
filtered += char
|
|
else:
|
|
filtered += ""
|
|
return filtered
|
|
|
|
val = RadioSettingValueString(0,7,_filter(_slabel.startname))
|
|
rs = RadioSetting("startname","Startup Label",val)
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("bg_color","LCD Color",
|
|
RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("bg_brightness","LCD Brightness",
|
|
RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("squelch","Squelch Level",
|
|
RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("timeout_timer","Timeout Timer (TOT)",
|
|
RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("auto_power_off","Auto Power Off (APO)",
|
|
RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voice_prompt","Beep Prompt",
|
|
RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("tbst_freq","Tone Burst Frequency",
|
|
RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("choose_tx_power","Max Level of TX Power",
|
|
RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power]))
|
|
basic.append(rs)
|
|
|
|
(flow,fhigh) = self.valid_freq[0]
|
|
flow /= 1000
|
|
fhigh /= 1000
|
|
fmidrange = (fhigh- flow)/2
|
|
|
|
rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow,
|
|
flow + fmidrange,
|
|
int(_freqrange.txrangelow)/10))
|
|
freqrange.append(rs)
|
|
|
|
rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange,
|
|
fhigh,
|
|
int(_freqrange.txrangehi)/10))
|
|
freqrange.append(rs)
|
|
|
|
rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow,
|
|
flow+fmidrange,
|
|
int(_freqrange.rxrangelow)/10))
|
|
freqrange.append(rs)
|
|
|
|
rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange,
|
|
fhigh,
|
|
int(_freqrange.rxrangehi)/10))
|
|
freqrange.append(rs)
|
|
|
|
return settings
|
|
|
|
def get_settings(self):
|
|
try:
|
|
return self._get_settings()
|
|
except:
|
|
import traceback
|
|
LOG.error( "failed to parse settings")
|
|
traceback.print_exc()
|
|
return None
|
|
|
|
def set_settings(self,settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element,RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
name = element.get_name()
|
|
|
|
if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]:
|
|
LOG.debug( "setting %s = %s" % (name,int(element.value)*10))
|
|
setattr(self._memobj.freqrange,name,int(element.value)*10)
|
|
continue
|
|
|
|
if name in ["startname"]:
|
|
LOG.debug( "setting %s = %s" % (name, element.value))
|
|
setattr(self._memobj.slabel,name,element.value)
|
|
continue
|
|
|
|
obj = _settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug( "using apply callback")
|
|
element.run_apply_callback()
|
|
else:
|
|
LOG.debug( "Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug( element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
if MMAPSIZE == len(filedata):
|
|
(flow,fhigh) = cls.valid_freq[0]
|
|
flow /= 1000000
|
|
fhigh /= 1000000
|
|
|
|
txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16
|
|
txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16
|
|
rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16
|
|
rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16
|
|
|
|
if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ):
|
|
return True
|
|
|
|
return False
|
|
|
|
# Declaring Aliases (Clones of the real radios)
|
|
class LT580VHF(chirp_common.Alias):
|
|
VENDOR = "LUITON"
|
|
MODEL = "LT-580_VHF"
|
|
|
|
|
|
class LT580UHF(chirp_common.Alias):
|
|
VENDOR = "LUITON"
|
|
MODEL = "LT-580_UHF"
|
|
|
|
|
|
class AT588220(chirp_common.Alias):
|
|
VENDOR = "Anytone"
|
|
MODEL = "AT-588_220"
|
|
|
|
|
|
|
|
|
|
@directory.register
|
|
class Th9000220Radio(Th9000Radio):
|
|
"""TYT TH-9000 220"""
|
|
VENDOR = "TYT"
|
|
MODEL = "TH9000_220"
|
|
BAUD_RATE = 9600
|
|
valid_freq = [(220000000, 260000000)]
|
|
ALIASES = [AT588220, ]
|
|
|
|
@directory.register
|
|
class Th9000144Radio(Th9000220Radio):
|
|
"""TYT TH-9000 144"""
|
|
VENDOR = "TYT"
|
|
MODEL = "TH9000_144"
|
|
BAUD_RATE = 9600
|
|
valid_freq = [(136000000, 174000000)]
|
|
ALIASES = [LT580VHF, ]
|
|
|
|
@directory.register
|
|
class Th9000440Radio(Th9000220Radio):
|
|
"""TYT TH-9000 440"""
|
|
VENDOR = "TYT"
|
|
MODEL = "TH9000_440"
|
|
BAUD_RATE = 9600
|
|
valid_freq = [(400000000, 490000000)]
|
|
ALIASES = [LT580UHF, ]
|