Project

General

Profile

Actions
Copy link

Bug #10167

closed

manjaro linux Errno 13 permission denied

Added by Trey Winchester about 2 years ago. Updated about 2 years ago.

Status:
Closed
Priority:
Urgent
Assignee:
-
Category:
-
Target version:
-
Start date:
12/10/2022
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Icom IC-282h
Platform:
Linux
Debug Log:
I read the instructions above:

Description

Im trying to use Chirp to program my Icom IC-2820h, i get this error message when i try to read from the radio:

[Errno 13] could not open port /dev/ttyS0: [Errno 13] Permission denied: ‘/dev/ttyS0’

im using an XLT RPC-Y1-UF Painless Programming Cable! similar to the RT systems FTDI cord.

Actions
Copy link
 #1

Updated by Jim Unroe about 2 years ago

  • Status changed from New to Feedback

If you are using a USB type programming cable, then the port to select is "/dev/ttyUSB0" (scroll all the way down to the bottom of the list).

Also your Manjaro "user" must be a member or the "dialout" group. See the "Running Under Linux" page. And don't forget to log out and back in for the group change to take effect.

https://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux

Jim KC9HI

Actions
Copy link
 #2

Updated by Trey Winchester about 2 years ago

Thank Jim! that worked like a charm once i went in as root and added myself to the uucp group!

73
Trey, KO4VON

Actions
Copy link
 #3

Updated by Martin Cooper about 2 years ago

  • Status changed from Feedback to Closed
Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC