CHIRP

OOPs hit submit instead of choose files... Duh

Here is a clean debug log and the image it sorta created.

Other than the first block, the other blocks of data seem to be the right size. I decoded memory position 1, and the 27 byte structure looked good to me. Funny there is nothing in the GUI for most of the memories, though the last bunch of memories are only off about 2 bytes in the names. The actual names are TGA through TGO for memories 486-500.

On the radio, memories populated are: 1, 11-15, 41-45, 51-54, 62, 64-65, 101, 137, 157-159, 174, 173, 201, 203, 211, 246, 268, 295,486-500
P1L is 3.500.00 lsb
P1U is 4.000.00 lsb
P2L is 28.300.00 usb
P2U is 29.700.00 usb

If you need more info just update the ticket when you get it.

Bill

OK, so I made some pretty good progress. Reducing the inital block count threw off all the other counts in the structure. I reduced them by 2, and I'm getting all the memories now on the gui. Not all the data is perfect, but this is good progress.

Here is the modified PY file, an image, and the debug log from when it was loaded.

The P1L/u and P2L/U are not showing up, I don't understand how they are offset yet, but will keep digging.

Also, I use the USB U data mode (User-U?) and that is not working, as is shown in the debug log.

Hope this gets you a good jump on supporting the native FT-450 and 450AT!

Also, could you tell me if there are changes to make to the py file to cause a new radio type to show on the dropdown list, or is this external to the PY file? I sort of expect you have to add new items to the list separately and then have them point to the appropriate py file, but thought I'd ask anyway.

Bill

F1gured out the issue with the PMS limits not displaying. The FT450 uses a single bit to expose the 4 PMS memories, and does not populate the "filled" byte at all. Modified the py to just test the first visible bit, and scrapped the filled test. More work will have to be done on the output side, but this was the main issue.

Remember all these changes are specific to the FT-450, NOT the D model.

Bill

Applied in changeset github|935507f120a55f4619244fee3134e7d4488c6b38.