CHIRP

1. What is the behavior you are seeing?

Radio connected to Windows PC running CHIRP. Communications appears to take place, but, uploaded data is blank.

1. What is the behavior you were expecting?

Uploaded data would have the contents of the radio as programmed (44 memory channels).

1. Can you reproduce the problem all the time?

Yes.

1. What are the steps required to reproduce the problem?

A. Connect radio
B. Start CHIRP
C. Execute command to download from radio
D. Observe radio display and blinking LED, indicating process is working
E. Observe that resulting img file has 25 blank entries

1. Is this specific to a certain radio model (driver) or something that you can reproduce with another radio?

Yes; also ...
-- this installation of CHIRP 0.3.1 works fine with Icom IC-T7H, and,
-- the TYT radio works fine with the factory-native program (same physical port interface).

Note:

'New Issue' tool shows only two possible entries for CHIRP version
and neither is 0.3.1 so ... I selected 'daily'; even though this test
was from the 0.3.1 release