Project

General

Profile

Actions

Bug #131

closed

FT-857D does not seem to load PMS-*L or PMS-* U

Added by Dave Koller over 12 years ago. Updated over 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
04/18/2012
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
FT-857D
Platform:
All
Debug Log:
I read the instructions above:

Description

Get invalid value for these fields if I try to add ... Seems to upload (into CHIRP) PMS-1L and PMS-1U but not allow change to take on that. Will not upload any other PMS memories (no matter what frequencies) Or allow entry. CHIRP daily-04182012 used but it seems to have been there on an older version also. First time I have put PMS memories in. No problem in RT systems to save.

Thanks

Dave Koller

Actions #1

Updated by Filippi Marco over 12 years ago

  • Status changed from New to In Progress
  • Assignee set to Filippi Marco
  • Platform changed from Windows to All

I can reproduce it so I'm going to debug ASAP

Actions #2

Updated by Dan Smith over 12 years ago

  • Status changed from In Progress to Closed
  • Target version set to 0.3.0

Fixed by Marco

Actions #3

Updated by Dave Koller over 12 years ago

Still does not import from radio (FT-857D) past PMS-1L and PMS-1U or PMS-2L and PMS-2U and above DO NOT import into CHIRP - chirp-daily-04202012-win32....

Dave Koller

Actions #4

Updated by Filippi Marco over 12 years ago

Will test again here, can you please send me a step by step instruction list on how to reproduce it?

Tnx

Actions #5

Updated by Dave Koller over 12 years ago

Thank you Filippi:

  1. Enter some scan limits on (actual radio) FT-857D mem channels PMS-1L and PMS-1U

  2. Enter some scan limits on (actual radio) FT-857D mem channels PMS-2L and PMS-2U

  3. Read data from radio with CHIRP and mem channels PMS-2L and PMS-2U will not import (or at

least do not show on screen.)PMS-1L and PMS-1U always show and appear to import from FT-857D.

You HAVE fixed the second part of that same problem as it would not allow you to even enter by hand to the PMS-*L or PMS-*U

I did not first explain in enough detail - my bad....

Actions #6

Updated by Dan Smith over 12 years ago

  • Status changed from Closed to In Progress

Re-opening per Marco

Actions #7

Updated by Filippi Marco over 12 years ago

  • Status changed from In Progress to Feedback

I uploaded a patch that should be imported to daily releases in the next days.
Please download it, test and let me know if I definitively solved this issue.

Tnx

Actions #8

Updated by Dan Smith over 12 years ago

  • Status changed from Feedback to Closed

Applied, thanks Marco!

I'll close this and you can re-re-open if necessary :)

Actions #9

Updated by Dave Koller over 12 years ago

Fixed and working !

Thanks Dan and Marco!!!

State tune for something else I might have spotted I want to check and see BUT this seems fixed....

Dave Koller

Actions

Also available in: Atom PDF