Bug #1511
closedVX-8R Failure to Communicate with the Radio: Received Incomplete Image from Radio
0%
Description
When I try to download from radio using my vx-8r and CHIRP the status bar in CHIRP and my radio both move to 100% complete but at the last second an error message pops up that reads "Failure to Communicate with the Radio: Received Incomplete Image from Radio." I downloaded the driver for my cable from http://chirp.danplanet.com/issues/1473 after googling the issue and being directed to a bug that was recently fixed. I'm using a Mac to run CHIRP. All I want to do is to upload a repeater list I've created to my radio, I'm not particularly interested in "downloading from radio" but CHIPR won't let me select "Upload to Radio" for some reason. How should I proceed?
Files
Updated by Cody Cook over 10 years ago
Hello.
I can confirm I have this issue with the radio on 0.4.0.
I was able to read it fine the first time I tried (brand new radio). My roommate suggested I factory default it (even though new). Once I factory defaulted the radio (holding band, hm/rv and the tx po and turning on) and replaced it back into 'clone' mode, I started receiving this error. I am not sure what was wiped from the radio that caused this that CHIRP is looking for that isn't there any longer. I made an image of my original layout so I might try and reload it and see if that helps at all. My roommate just tried it on his Linux after trying for a while in CHIRP and it finally let him do it again but we're not sure what caused it.
Updated by Cody Cook over 10 years ago
Cody Cook wrote:
Hello.
I can confirm I have this issue with VX-8DR on 0.4.0.
I was able to read it fine the first time I tried (brand new radio). My roommate suggested I factory default it (even though new). Once I factory defaulted the radio (holding band, hm/rv and the tx po and turning on) and replaced it back into 'clone' mode, I started receiving this error. I am not sure what was wiped from the radio that caused this that CHIRP is looking for that isn't there any longer. I made an image of my original layout so I might try and reload it and see if that helps at all. My roommate just tried it on his Linux after trying for a while in CHIRP and it finally let him do it again but we're not sure what caused it.
Updated by Filippi Marco over 10 years ago
- Chirp Version changed from 0.3.0 to 0.4.0
Please try again and send your debug log, see How_To_Report_Issues
Tnx
73 de IZ3GME Marco
Updated by Cody Cook over 10 years ago
CHIRP 0.4.0 on WinVista/7 (Python 2.7.2)
Registered Alinco_DR03T = DR03Radio
Registered Alinco_DR06T = DR06Radio
Registered Alinco_DR135T = DR135Radio
Registered Alinco_DR235T = DR235Radio
Registered Alinco_DR435T = DR435Radio
Registered Alinco_DJ596 = DJ596Radio
Registered Jetstream_JT220M = JT220MRadio
Registered Alinco_DJ175 = DJ175Radio
Registered AnyTone_5888UV = AnyTone5888UVRadio
Registered Intek_HR-2040 = IntekHR2040Radio
Registered Polmar_DB-50M = PolmarDB50MRadio
Registered Powerwerx_DB-750X = PowerwerxDB750XRadio
Registered Baofeng_UV-3R = UV3RRadio
Registered Baofeng_UV-5R = BaofengUV5R
Registered Baofeng_F-11 = BaofengF11Radio
Registered Baofeng_UV-82 = BaofengUV82Radio
Registered Baofeng_UV-6 = BaofengUV6Radio
Registered Baojie_BJ-UV55 = BaojieBJUV55Radio
Registered Kenwood_TH-D7 = THD7Radio
Registered Kenwood_TH-D7G = THD7GRadio
Registered Kenwood_TM-D700 = TMD700Radio
Registered Kenwood_TM-V7 = TMV7Radio
Registered Kenwood_TM-G707 = TMG707Radio
Registered Kenwood_TH-G71 = THG71Radio
Registered Kenwood_TH-F6 = THF6ARadio
Registered Kenwood_TH-F7 = THF7ERadio
Registered Kenwood_TM-D710 = TMD710Radio
Registered Kenwood_TH-D72_live_mode = THD72Radio
Registered Kenwood_TM-V71 = TMV71Radio
Registered Kenwood_TH-K2 = THK2Radio
Registered Kenwood_TM-271 = TM271Radio
Registered Kenwood_TM-281 = TM281Radio
Registered Kenwood_TM-471 = TM471Radio
Registered Icom_7200 = Icom7200Radio
Registered Icom_7000 = Icom7000Radio
Registered Icom_746 = Icom746Radio
Registered Yaesu_FT-1802M = FT1802Radio
Registered Yaesu_FT-2800M = FT2800Radio
Registered Yaesu_FT-60 = FT60Radio
Registered Yaesu_FT-7800_7900 = FT7800Radio
Registered Yaesu_FT-8800 = FT8800Radio
Registered Yaesu_FT-8900 = FT8900Radio
Registered Yaesu_FT-817 = FT817Radio
Registered Yaesu_FT-817ND = FT817NDRadio
Registered Yaesu_FT-817ND_US = FT817NDUSRadio
Registered Yaesu_FT-857_897 = FT857Radio
Registered Yaesu_FT-857_897_US = FT857USRadio
Registered Yaesu_FT-90 = FT90Radio
Registered Yaesu_FTM-350 = FTM350Radio
Registered Generic_CSV = CSVRadio
Registered Commander_KG-UV = CommanderCSVRadio
Registered RT_Systems_CSV = RTCSVRadio
Registered ARRL_Travel_Plus = TpeRadio
Registered Generic_XML = XMLRadio
Registered Baofeng_BF-888 = H777Radio
Registered Icom_IC-208H = IC208Radio
Registered Icom_IC-2100H = IC2100Radio
Registered Icom_IC-2200H = IC2200Radio
Registered Icom_IC-2720H = IC2720Radio
Registered Icom_IC-2820H = IC2820Radio
Registered Icom_IC-91_92AD = IC9xRadio
Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio
Registered Icom_IC-Q7A = ICQ7Radio
Registered Icom_IC-T70 = ICT70Radio
Registered Icom_IC-T7H = ICT7HRadio
Registered Icom_IC-T8A = ICT8ARadio
Registered Icom_IC-W32A = ICW32ARadio
Registered Icom_IC-V82_U82 = ICx8xRadio
Registered Icom_ID-31A = ID31Radio
Registered Icom_ID-51A = ID51Radio
Registered Icom_ID-800H_v2 = ID800v2Radio
Registered Icom_ID-880H = ID880Radio
Registered Icom_ID-80H = ID80Radio
Registered Kenwood_HMK = HMKRadio
Registered Kenwood_ITM = ITMRadio
Registered Puxing_PX-777 = Puxing777Radio
Registered Puxing_PX-2R = Puxing2RRadio
Registered Kenwood_TH-D72_clone_mode = THD72Radio
Registered TYT_TH-UVF1 = TYTTHUVF1Radio
Registered TYT_TH-UV3R = TYTUV3RRadio
Registered TYT_TH-UVF8D = TYTUVF8DRadio
Registered Kenwood_TK-7102 = KenwoodTK7102Radio
Registered Kenwood_TK-8102 = KenwoodTK8102Radio
Registered Kenwood_TK-7108 = KenwoodTK7108Radio
Registered Kenwood_TK-8108 = KenwoodTK8108Radio
Registered Baofeng_UV-B5 = BaofengUVB5
Registered Yaesu_VX-2 = VX2Radio
Registered Yaesu_VX-3 = VX3Radio
Registered Yaesu_VX-5 = VX5Radio
Registered Yaesu_VX-6 = VX6Radio
Registered Yaesu_VX-7 = VX7Radio
Registered Yaesu_VX-8_R = VX8Radio
Registered Yaesu_VX-8_DR = VX8DRadio
Registered Yaesu_VX-8_GE = VX8GERadio
Registered Vertex_Standard_VXA-700 = VXA700Radio
Registered Wouxun_KG-UVD1P = KGUVD1PRadio
Registered Wouxun_KG-UV6 = KGUV6DRadio
Registered Wouxun_KG-816 = KG816Radio
Registered Wouxun_KG-818 = KG818Radio
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
Skipping existing stock config
User selected Yaesu VX-8 on port COM5
Clone thread started
000: 00 41 48 32 39 44 00 00 .AH29D..
008: 01 01 00 00 00 00 00 00 ........
-- Exception: --
Traceback (most recent call last):
File "chirpui\clone.pyo", line 227, in run
File "chirp\yaesu_clone.pyo", line 215, in sync_in
File "chirp\yaesu_clone.pyo", line 85, in _clone_in
RadioError: Failed to communicate with the radio: Received incomplete image from radio¶
Clone failed: Failed to communicate with the radio: Received incomplete image from radio
Clone thread ended
--- Exception Dialog: Failed to communicate with the radio: Received incomplete image from radio ---
Traceback (most recent call last):
File "chirpw", line 74, in
AttributeError: 'NoneType' object has no attribute 'split'¶
Updated by Christof Bodner over 10 years ago
Hi,
I also get the same error message, I am running
Linux mint 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 i686 i686 i686 GNU/Linux
"Failed to communicate with the radio: Received incomplete image from radio"
I attached my debug.log, chirp version is 0.4.0 and the radio is a VX-8G.
I like the software and I am looking forward to get a FT1D. I will check how to support this Open-Source software by including support for this radio.
73 de Christof
Updated by Bernhard Hailer almost 5 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to Yaesu VX-8DR
I assume this isn't an issue any more? Works with my VX-8...
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
No more feedback by submitter.