Bug #195
closedUV-5R
0%
Description
I recently downloaded your CHIRP for the UV-5R. I was able to upload frequencies and I am able to receive but my audio cannot be heard. I noticed on one of my other radios that a signal is detected from the UV-5R but nothing is heard.
Any ideas? Do you have a good reference on what the different codes are for programming?
Updated by Dan Smith over 12 years ago
- Status changed from New to Rejected
As suggested by the folks on the UV5R list, this is likely a problem with your duplex/offset (i.e. transmit frequency). If you were able to program the radio, then this is not a chirp bug. This bug tracker is not an appropriate place to seek help in the basics of programming your radio. Please refer your question back to the mailing list and provide the details folks were asking for.
Thanks!
Updated by Ed Morales over 12 years ago
Okay this response is not acceptable. I believe that there is not enough support with your software. You should at least offer an on-line manual on how to use it.
Updated by Dan Smith over 12 years ago
I'd be more than happy to offer you a full refund of your purchase price if that would help.