Bug #2519
open[TERMN-8R] Signaling being randomly set
0%
Description
When I program my TERMN-8R using the build: daily-20150411, some channels have a signaling mode set.
It appears to be random both on the channel that gets to optional signaling value set as well as the type of signaling.
Please let me know if there is anything I can do to help. Some way of getting detailed logs, etc.
Files
Updated by Jim Unroe about 9 years ago
- Status changed from New to Feedback
- Platform changed from Windows to All
Brad,
I am looking into this. I have not been able to duplicate this here. I believe that it may because the OEM software leaves the channel data dirty when a memory is taken out of service.
Before programming a channel highlight it and then press the [Delete] key. This will initialize the highlighted memory. Then program the channels and see if it still happens.
You might attach an image that you have where the signaling is enabled so I can take a look at it.
Jim KC9HI
Updated by Brad Dux almost 9 years ago
- File TERMN-8r.img TERMN-8r.img added
In this image, the signalling was set on channels 7, 9, and 16.
Updated by Jim Unroe almost 9 years ago
- Status changed from Feedback to In Progress
Thanks Brad. I'm looking into it.
Jim KC9HI