Actions
Bug #3061
closedBaofeng UV-5RV2+ does not transmit
Start date:
12/14/2015
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5RV2+
Platform:
Windows
I read the instructions above:
Description
all programmed correctly uv-5rv2+ wont transmit
Updated by Jim Unroe almost 9 years ago
- Status changed from New to Feedback
Bernard,
I'm afraid more detail than that will be required. Attach your correctly programmed image to this issue so it can be reviewed. What are you using for a battery? If the voltage to the radio is too high it won't transmit. For example you you use (6) 1.5 volt alkaline cells in an AA-cell battery pack (6 x 1.5 = 9.0 volts and the radio requires 7.4) then the radio will not TX. In this case you would use (5) alkaline cells + 1 dummy AA-cell or (6) 1.2 volt Ni-Mh cells.
Jim KC9HI
Updated by Bernhard Hailer almost 5 years ago
- Subject changed from baofeng to Baofeng UV-5RV2+ does not transmit
- Status changed from Feedback to Closed
- Assignee deleted (
Bernard Wilson) - Priority changed from High to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to Baofeng UV-5RV2+
No more feedback by submitter.
Actions