Bug #3087
closedUV-82 on Mac, will upload to chirp once, then will not download to radio
0%
Description
I have a UV-82 and recently got a new mac. With the software and drivers installed, when I restart my computer and open chirp, I AM able to download from the radio into chirp once. When I try to download from chirp to the radio however, it says radio failed to respond, and also after the first download to chirp, I get the same error message when trying to download from the radio to chirp again, until I restart the computer and the program.
Updated by Jim Unroe over 8 years ago
- Status changed from New to Feedback
Cody,
This is most likely a driver issue. Which chip is in your programming cable? If it is a Prolific type chip, you may have to install one of the generic drivers.
Jim KC9HI
Updated by Cody Catalano over 8 years ago
Jim Unroe wrote:
Cody,
This is most likely a driver issue. Which chip is in your programming cable? If it is a Prolific type chip, you may have to install one of the generic drivers.
Jim KC9HI
I had the generic one installed at first and it would not even show as an optional port to download from. The current prolific driver installed is the first of 3 installed drivers to show up under the dropdown in CHIRP as an option (aside from the standard Mac bluetooth port)
Updated by Cody Catalano over 8 years ago
If it makes a difference, I have Mac OS X - El Capitan
Updated by Bernhard Hailer about 4 years ago
- Priority changed from Immediate to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
Is this still an issue?
Updated by Bernhard Hailer about 4 years ago
- Status changed from Feedback to Closed
- Model affected changed from UV-82 to Baofeng UV-82
No more feedback by submitter.