Actions
Bug #3359
closederror 3
Start date:
02/19/2016
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
unknown
Platform:
Windows
I read the instructions above:
Updated by William Blankinship over 8 years ago
William Blankinship wrote:
Will not up load. Just get error 3. Has been working.
Updated by Jim Unroe over 8 years ago
- Status changed from New to Feedback
Sounds to me like you have plugged your programming cable into a different USB port. If your programming cable has a Prolific type chip in it, Windows will assign another COM port number to your programming cable.
CHIRP remembers the last use COM port number used and preselects it even if that COM port no longer exists. The when you try to upload, the error 3 occurs. You will have to reselect new COM port number.
Updated by Bernhard Hailer almost 5 years ago
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to unknown
Did Jim's input help? Thanks.
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
No more feedback by submitter.
Actions