Bug #3383: UV-5R Bandwidth in Channel mode - CHIRP

Actions

Copy link

Bug #3383

closed

UV-5R Bandwidth in Channel mode

Added by Ric Beachey almost 9 years ago. Updated over 4 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Category:

Target version:

Start date:

02/23/2016

Due date:

% Done:

Estimated time:

Chirp Version:

daily

Model affected:

Baofeng UV-5R

Platform:

All

Debug Log:

I read the instructions above:

Description

I select narrow bandwidth in workmode settings, but in Channel Mode the radio uses wideband. In frequency mode there is no problem. This is with UV-5R and UV-5RE Plus

Actions

Copy link

Updated by Jim Unroe almost 9 years ago

Status changed from New to Feedback

Ric,

The workmode bandwidth setting is for the 2 VFOs (frequency mode) only. All of the workmode settings, except for the top 5, are for presetting values the VFOs.

There isn't a global setting for MR (channel) mode for 2 reasons.

1 The bandwidth menu 5 (WN) in the radio is "read only" in MR mode. It can only be used to determine what the bandwidth of a programmed channel is.

2 The bandwidth of the channels are all set on a per channel basis. So the bandwidth in MR mode is whatever value has been programmed into each individual channel.

See the "Reference for UV-5R Menus":http://www.miklor.com/COM/UV_MenuDef.php for more details.

Jim

Actions

Copy link