TYT-9800 & BF-9v2+
When opening chirp and downloading config from radio. I get all my saved channels just fine under the memory tab. I click the 'settings' tab and nothing shows up. It's a blank screen. Ive tried uninstalling and reinstalling, opening a previous config file, installing an older version and redownloading the config from radio(s). I'm currently running the daily 3/9/16 build.
Updated by Jim Unroe about 7 years ago
- Status changed from New to Feedback
There is most likely a setting that is out-of-range. The way I would "fix" the BF-9V2+ would be to...
1 RESET it using menu 40
2 download from it
3a either import the channels from your original image
3b or load original image into a 2nd tab and then copy-and-paste the channels over to the new tab
Now you should be able to see the Settings tabs and make changes as needed.
A similar process should take care of the TYT-9800.
Updated by Bernhard Hailer about 3 years ago
- Status changed from Feedback to Closed
- Priority changed from Urgent to Normal
- Target version set to chirp-legacy
- Model affected changed from tyt-9800 & BF-9v2+ to TYT TH-9800, Baofeng BF-9V2+
Solution suggested; no more traffic on this ticket.