Project

General

Profile

Actions

Bug #3551

closed

Yaesu FT-8800 Memory Banks - Ubuntu V15.10

Added by Mike Bruce over 8 years ago. Updated about 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
04/06/2016
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-8800
Platform:
Linux
Debug Log:
I read the instructions above:

Description

Hi,

I am using the latest version of Chirp running on Ubuntu V15.10 O/S. This is the first time I have used Chirp on this radio. Previously I used the vendor software which, unfortunately, only works on Windows

When downloading information from the FT8800, whilst all memory information is received and the list of stations is shown in the left and right hand memory banks, the columns indicating which station is stored in each bank are blank.

Looking at the compatibility list it appears that this might be one of the unsupported features. If it is, please could you let me know if it is planned to support it in future. Otherwise advice on what I might be doing incorrectly would be appreciated.


Related issues 2 (1 open1 closed)

Related to Bug #1785: Yaesu FT-8800 - Right side not getting all settings loadedClosed07/24/2014

Actions
Related to Bug #1965: Yaesu FT-8800R Right Side Memory Banks Not ProgrammingFeedback10/14/2014

Actions
Actions #1

Updated by Mike Bruce over 8 years ago

I should add that I use the numbered memory banks extensively and the ability to move stations from one bank to another is important to me

Actions #2

Updated by Mike Bruce over 7 years ago

It has been several months since I flagged this problem and, despite many software releases, there is still no solution it seems to the absence of this feature on the Linux/Ubuntu platform although the feature does exist on Windows.

Please could you advise me if there is an intention to bring the feature into the Linux/Ubuntu platform - or am I wasting my time waiting.

Kind regards

73, Mike M0ITI

Actions #3

Updated by Bernhard Hailer over 4 years ago

  • Status changed from New to Feedback
  • Target version set to chirp-legacy
  • Model affected changed from YAESU FT8800 to Yaesu FT-8800

This should be at least partially supported by now (however, with bugs).
Please check #1965 and let me know if you think it describes your problem.
In that case I will close this ticket and ask everybody to continue the discussion in #1965. Thanks!

Actions #4

Updated by Bernhard Hailer about 4 years ago

  • Status changed from Feedback to Closed

No more feedback by submitter. Presumably duplicated by #1965. Please let us know in case the ticket should be reopened.

Actions

Also available in: Atom PDF