Project

General

Profile

Actions

New Model #3611

closed

TYT TH-9000D

Added by Jim MacKenzie over 8 years ago. Updated about 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
04/24/2016
Due date:
% Done:

0%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

Hi,

I have a 1.25m (222 MHz) model of the TYT TH-9000D radio. This is officially supported by CHIRP. (I run CHIRP under Linux Mint.)

I get the following error when trying to download the radio's base config, using CHIRP-daily-20160419:

[2016-04-24 13:20:46,031] chirp.ui.common - ERROR: ----------------
[2016-04-24 13:20:46,031] chirp.ui.clone - ERROR: Clone failed: Unsupported model
[2016-04-24 13:20:46,298] chirp.ui.clone - DEBUG: Clone thread ended
[2016-04-24 13:20:46,299] chirp.ui.reporting - DEBUG: Reporting model usage: TYT_TH9000_220,download,True
[2016-04-24 13:20:46,301] chirp.ui.reporting - DEBUG: Reporting exception
[2016-04-24 13:20:46,301] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Unsupported model ---
[2016-04-24 13:20:46,301] chirp.ui.inputdialog - ERROR: None

[2016-04-24 13:20:46,302] chirp.ui.inputdialog - ERROR: ----------------------------

USB port is correct (/dev/ttyUSB2). I am using the TYT programming cable that came with the radio. It does not matter if the cable is plugged into a USB 3.0 or 2.0 port. (I made sure that the cable was still assigned /dev/USB2.)

Please let me know if there is any information I can supply to help debug this.


Related issues 1 (0 open1 closed)

Related to Bug #2839: TYT TH-9000D-144Closed09/05/2015

Actions
Actions

Also available in: Atom PDF