Actions
Bug #366
closedUV-5R backlight setting
Start date:
12/20/2012
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
Windows
I read the instructions above:
Description
When I tried to read my UV-5R+ (BFB293 firmware) it appeared to do the read, but then gave me an error message reading "An error has occurred | Value 10 not in range 0-5". On a hunch, I went to menu 6 on my radio--the backlight timer setting--and changed it from 10 to 5. (BFB293 allows a maximum backlight setting of 10) After that, the new CHIRP build read the radio without a problem.
Updated by Dan Smith almost 12 years ago
- Status changed from New to Closed
- Assignee set to Dan Smith
- Target version set to 0.3.0
- Chirp Version changed from 0.2.3 to daily
Fixed in r1765
Updated by Jim Unroe almost 12 years ago
This does indeed allow the setting to be forced higher for the older radios. Through additional testing with my UV-5R with BFB231 firmware, I have determined that this setting can be 'forced' all the way up to 24.
Jim KC9HI
Actions