Bug #3957
closedCHIRP daily-20160819 has a bug for the BTECH UV-5X3
0%
Description
The CHIRP [POWER] settings are reversed. When CHIRP shows [LOW POWER] the radio shows [HIGH POWER] and the opposite is also true. When CHIRP shows [HIGH POWER] the radio shows [LOW POWER]
Files
Updated by Jim Unroe over 8 years ago
- Status changed from New to Feedback
This was pointed out on Friday. A patch was submitted right away. The next CHIRP daily build will have this corrected. In the mean time just keep programming it the opposite of what you want. It will then be correct with the new build.
Jim KC9HI
Updated by Mike K over 8 years ago
This "reversed power" issue affects ALL models, not just the 5X3. I noticed the same issue when programming my 2501+220.
Updated by Jim Unroe over 8 years ago
Mike,
It is hard to imagine that the power levels would be reversed and nobody noticed or brought it up for 5 months. But just the same, I just tested each of my BTECH UV-2501, UV-2501+220 and UV-5001 radios.
After downloading from each radio, the power levels shown in CHIRP matched the power levels in the radio. I edited a channel's power level and uploaded back to the radio. The channel in the radio matched the change in CHIRP. I then read each radio back. They still matched. Then I set them all back to the original value in CHIRP and uploaded back to the radio.
If you think my testing is in error, then open another issue. This issue is for the UV-5X3. Be sure to document why you think the power levels are reversed in the btech driver.
Jim KC9HI
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed