Project

General

Profile

Actions

Feature #399

closed

[UV-5R] Add Settings Related to Squelch Tail Elimination

Added by Jim Unroe almost 12 years ago. Updated almost 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
01/06/2013
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
UV-5R
I read the instructions above:

Description

UV-5R menu 35 (STE) and menu 36 (RP-STE) default to ON and 5 (500 milliseconds) after a reset. Typical use requires that they both be set to OFF. Add settings corresponding to the UV-5R menu 35, menu 36 and menu 37 (RPT-RL), so they can be adjusted using CHIRP.

Actions #1

Updated by Jim Unroe almost 12 years ago

  • Status changed from New to Closed

All settings were added to the Advanced Settings menu
Squelch Tail Eliminate (HT to HT) - corresponds to menu 35
Squelch Tail Eliminate (repeater) - corresponds to menu 36
STE Repeater Delay - corresponds to menu 37

Actions #2

Updated by Dan Smith almost 12 years ago

  • Target version set to 0.3.0
Actions

Also available in: Atom PDF