Bug #4339
openYaesu FT-8900 repeater offset
0%
Description
https://www.repeaterbook.com/repeaters/details.php?state_id=39&ID=450
the repeater above has an offset of 0.24. If I type that offset into CHIRP, it initially seems to take the offset. However, it does not take that offset. When I save the programming file (IMG), and then re-open the file, the offset is changed to 0.2. If I try to program the radio, CHIRP changes the offset to 0.2. If I try to import a CSV file with the correct 0.24 offset, that is changed to 0.2. CHIRP will not take the 0.24 offset required for this repeater.
Updated by Bob Mueller over 7 years ago
I was able to get the repeater programmed using "split"
I still think this is a bug, as CHIRP allows to enter an offset value that you can not save or program to the radio.
Updated by Bernhard Hailer about 4 years ago
- Assignee deleted (
Bob Mueller) - Target version set to chirp-legacy
- Model affected changed from (All models) to Yaesu FT-8900
Have you tried with a recent version since you submitted this? I'm asking because there might have been some changes in the driver since you tried last.