Actions
Feature #4353
closedAlinco DR-135 MKIII Frequency Range Up To 173.995 MHz
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/01/2017
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Alinco DR-135 MKIII
I read the instructions above:
Description
Hi, currently i found this issue.
I have a repeater frequency TX 163.450, RX 173.225, and with CTCSS tone.
I have already saved the frequency manually in radio, but when i try to download it using Chirp, that channel marked as error (see attachment channel 29).
When I try to input manual in Chirp, I put 163.450 in Frequency field, and duplex + 9.775, it raised error (see attachment out of range).
AFAIK Alinco DR-135 (MKII and MKIII) can handle frequency up to 173.995 MHz.
Would you mind to fix this?
Thanks
Files
| Chirp Error Download.png (20.8 KB) Chirp Error Download.png | Error download frequency above 173.000 MHz | ||
| Chirp Error Out Of Range.png (6 KB) Chirp Error Out Of Range.png | Error input duplex (Tx) above 173.000 MHz |
Updated by Bernhard Hailer over 3 years ago
- Status changed from New to Closed
Sorry, but the DR-135 only transmits in the 2M ham bands. Therefore you can't program a repeater (which by definition transmits) outside of the range 144.000 .. 147.995 MHz.
Actions