Project

General

Profile

Actions

Bug #4643

closed

BAOFENG

Added by Rolle Stavlind over 7 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
03/19/2017
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
All
Debug Log:
I read the instructions above:

Description

När jag försöker att läsa från radion får jag meddelandet " An error has occurred. Incorrect "Model" selected.
Håller jag knapp 3 nertryck på radion så får jag upp BFB297. Serienummer 13U0997705.


Files

debug.log (20.9 KB) debug.log Rolle Stavlind, 03/19/2017 09:57 AM

Related issues 1 (0 open1 closed)

Related to New Model #4445: When using the BF-F8HP driver for Baofeng GT-3TP Mk III, I get 'Incorrect 'Model' selected'ClosedJim Unroe01/23/2017

Actions
Actions #1

Updated by Jim Unroe over 7 years ago

  • Status changed from New to Feedback

Holding the 3 key has not provided the firmware version since the year 2013. All UV-5R type radios since then report BFB297 no matter what the "real" firmware version is.

The 'Incorrect "Model" selected' would indicate that the radio does not have a firmware version that CHIRP recognizes. Please include the debug.log file. The "How To Report Issues":http://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues page shows how to locate the debug.log file.

Google translated to Swedish:

Håll knapp 3 har inte lämnat firmware version sedan år 2013. Alla UV-5R typ radioapparater sedan rapportera BFB297 oavsett vad "riktiga" firmware version är.

Den "Fel" Model "valt" tyder på att radion inte har firmware version som CHIRP erkänner. Inkludera debug.log filen. Den "hur man rapporterar Issues": http: //chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues sida visar hur du hittar debug.log filen.

Jim KC9HI

Actions #2

Updated by Rolle Stavlind over 7 years ago

Hej!

Här kommer den senaste debug.log filen.
Hoppas att det går att lösa mina problem. Det är bara en av 5 radioapparater som det inte fungerar att läsa från.

Actions #3

Updated by Jim Unroe over 7 years ago

The problem is that this radio does not report a valid firmware version CHIRP.

Problemet är att denna radio inte rapporterar en giltig firmware version Chirp.

[2017-03-19 17:54:50,351] chirp.drivers.uv5r - INFO: Radio Version is '\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff'

Actions #4

Updated by Rolle Stavlind over 7 years ago

Något förslag på hur det går att lösa så att det går att programmera radion med CHIRP?

Actions #5

Updated by Jim Unroe over 7 years ago

  • Assignee set to Jim Unroe
  • Target version set to 0.5.0
  • Platform changed from Windows to All

I am trying to see if I can come up with a solution.

Jag försöker att se om jag kan komma fram till en lösning.

Jim KC9HI

Actions #6

Updated by Jim Unroe over 7 years ago

The solution for this issue is being addressed "here":http://chirp.danplanet.com/issues/4445#note-12

Jim KC9HI

Actions #7

Updated by Rolle Stavlind over 7 years ago

Hi!

Thanks, now everything works perfect with all my Baofeng.

Another question. Do youk now anything about the progress of driver for Wouxun KG-UV8D?

Thanks again /Rolle

Actions #8

Updated by Bernhard Hailer over 4 years ago

  • Status changed from Feedback to Closed

A solution has been provided, see #4445.

Actions

Also available in: Atom PDF