Bug #4753
openOnly odd channels are uploaded, nothing on Ch 1-9
0%
Description
I just installed a new Leixen VV-898 radio, installed Chirp, and tried to quickly configure it. It was a quick, 20 minute learning curve to do this.
I selected a number of "stock config" channels to upload. I figured out the interface of Chirp quickly enough, and chose to set each channel as a preset. I filled up all 200 channels, and the rest were in red, informing me that those would not upload.
I uploaded everything to the radio, connected the antenna and mic, and proceeded to select a presrt channel.
The following problems were noted:
- The first 9 channels were not set. Channel 1 was a random freq. Some preset numbers (2 - 9) didn't even show up.
- None of the even channel numbers were shown. Every other channel was fine.
- Instead of storing about 200 preset channels, only about half, 90, were in memory.
So on Channel 10, which happened to be one I wanted anyway, everything worked on the radio. But Channel 11 skipped one and it was another "odd" channel number.
I have the latest daily, Windows 10. 20170420 is the software version.
I just loaded the software to look at my saved file image. I turned on "show Empty." It shows the random "400.10000" as channel 1, grayed out channels 2-6, and some preloaded frequencies on 7,8,9. But channels 7-9 are not correct on the radio itself.
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Model affected changed from (All models) to Leixen VV-898
- Platform changed from Windows to All
Have you been able to resolve this on your own since you submitted this?
Have you tried with a recent version since you submitted this?