Project

General

Profile

Actions
Copy link

Bug #5111

open

UV5R offset precision not right.

Added by Lord Kaos about 7 years ago. Updated about 4 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
chirp-legacy
Start date:
08/27/2017
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
All
Debug Log:
I read the instructions above:

Description

Hi!

I noticed that the value I set in offset in my UV5R (1FB297 - HN5RV01) is not cloned right. VFO Mode

If I setup in the radio: 000.025, I get a: 0.020000 in Chrip.
If I setup in the radio: 000.035, I get a: 0.030000 in Chrip.

It always display only the two first decimal places.
But rarely, if I set in Chirp 0.040000 where I expected to see 0.035...after uploading to the radio, I see 000.045 in the radio display....so...what can be wrong with my 3th decimal?

I'm using:
CHIRP daily-20170714
GTK 2.24.10
PyGTK 2.24.0
Python 2.7.10

I've other radios to test it.

This is my last fragment of the log.

[2017-08-27 19:05:49,447] chirp.ui.editorset - DEBUG: changed
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting squelch = 1
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting save = 1:3
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting abr = 5
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting beep = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting timeout = 60 sec
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting mdfa = Frequency
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting mdfb = Frequency
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting wtled = Purple
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rxled = Blue
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting txled = Orange
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting roger = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting vox = OFF
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting tdr = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting tdrab = Off
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting almod = Tone
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting voice = English
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting screv = TO
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting bcl = False
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting autolk = False
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting fmradio = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting ste = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rpste = 5
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rptrl = OFF
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting reset = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting menu = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line1 = 160508N
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line2 =

[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line1 = KAOS

[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting line2 = MSG
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting ponmsg = Message
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting lower = 130
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting upper = 176
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting enable = True
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting lower = 400
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting upper = 520
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting enable = True
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting displayab = B
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting workmode = Frequency
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting keylock = False
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting mrcha = 127
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting mrchb = 126
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting sftd = Off
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting sftd = Off
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting txpower = Low
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting txpower = Low
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting widenarr = Wide
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting widenarr = Wide
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting scode = 1
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting scode = 1
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting step = 12.5
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting step = 12.5
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting fm_presets = 1027
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting aniid = EOT
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfst = DT+ANI
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfon = 80 ms
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfoff = 80 ms
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting pttlt = 5
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql0 = 0
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql1 = 21
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql2 = 23
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql3 = 25
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql4 = 27
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql5 = 29
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql6 = 30
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql7 = 31
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql8 = 32
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql9 = 33
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql0 = 0
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql1 = 19
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql2 = 20
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql3 = 21
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql4 = 22
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql5 = 23
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql6 = 24
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql7 = 25
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql8 = 26
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql9 = 27
[2017-08-27 19:07:34,454] chirp.ui.editorset - DEBUG: changed

Actions
Copy link
 #1

Updated by Lord Kaos about 7 years ago

I tested some other things...that problem happens only in the tab for te VFO settings (work mode settings).

In the channels tab, the value works perfect.

Thanks in advance.

Actions
Copy link
 #2

Updated by Bernhard Hailer about 4 years ago

  • Target version set to chirp-legacy
  • Model affected changed from UV5R to Baofeng UV-5R
  • Platform changed from Windows to All
Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC