Project

General

Profile

Actions
Copy link

Bug #5111

open

UV5R offset precision not right.

Added by Lord Kaos about 7 years ago. Updated about 4 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
chirp-legacy
Start date:
08/27/2017
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-5R
Platform:
All
Debug Log:
I read the instructions above:

Description

Hi!

I noticed that the value I set in offset in my UV5R (1FB297 - HN5RV01) is not cloned right. VFO Mode

If I setup in the radio: 000.025, I get a: 0.020000 in Chrip.
If I setup in the radio: 000.035, I get a: 0.030000 in Chrip.

It always display only the two first decimal places.
But rarely, if I set in Chirp 0.040000 where I expected to see 0.035...after uploading to the radio, I see 000.045 in the radio display....so...what can be wrong with my 3th decimal?

I'm using:
CHIRP daily-20170714
GTK 2.24.10
PyGTK 2.24.0
Python 2.7.10

I've other radios to test it.

This is my last fragment of the log.

[2017-08-27 19:05:49,447] chirp.ui.editorset - DEBUG: changed
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting squelch = 1
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting save = 1:3
[2017-08-27 19:07:34,446] chirp.drivers.uv5r - DEBUG: Setting abr = 5
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting beep = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting timeout = 60 sec
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting mdfa = Frequency
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting mdfb = Frequency
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting wtled = Purple
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rxled = Blue
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting txled = Orange
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting roger = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting vox = OFF
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting tdr = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting tdrab = Off
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting almod = Tone
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting voice = English
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting screv = TO
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting bcl = False
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting autolk = False
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting fmradio = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting ste = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rpste = 5
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting rptrl = OFF
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting reset = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting menu = True
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line1 = 160508N
[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line2 =

[2017-08-27 19:07:34,447] chirp.drivers.uv5r - DEBUG: Setting line1 = KAOS

[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting line2 = MSG
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting ponmsg = Message
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting lower = 130
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting upper = 176
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting enable = True
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting lower = 400
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting upper = 520
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting enable = True
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting displayab = B
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting workmode = Frequency
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting keylock = False
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting mrcha = 127
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Setting mrchb = 126
[2017-08-27 19:07:34,448] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting sftd = Off
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting sftd = Off
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting txpower = Low
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting txpower = Low
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting widenarr = Wide
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting widenarr = Wide
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting scode = 1
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting scode = 1
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting step = 12.5
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting step = 12.5
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Setting fm_presets = 1027
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,450] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,451] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting aniid = EOT
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Using apply callback
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfst = DT+ANI
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfon = 80 ms
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting dtmfoff = 80 ms
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting pttlt = 5
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql0 = 0
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql1 = 21
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql2 = 23
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql3 = 25
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql4 = 27
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql5 = 29
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql6 = 30
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql7 = 31
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql8 = 32
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql9 = 33
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql0 = 0
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql1 = 19
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql2 = 20
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql3 = 21
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql4 = 22
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql5 = 23
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql6 = 24
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql7 = 25
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql8 = 26
[2017-08-27 19:07:34,453] chirp.drivers.uv5r - DEBUG: Setting sql9 = 27
[2017-08-27 19:07:34,454] chirp.ui.editorset - DEBUG: changed

Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC