Actions
New Model #5443
closedLEIXEN VV-898S 25W V1.08
Start date:
12/13/2017
Due date:
% Done:
0%
Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:
Description
CHIRP daily-20171120 is not working with the V1.08 radio. Chirp is able to comunicate, but the filled in channels are all wired in the radio. Read out of the radio get a standard with no changes. It does not matter what was filled in before.
Updated by Brian Dickman over 6 years ago
- Status changed from New to In Progress
- Assignee set to Brian Dickman
Please try with the new test driver attached on issue #4069 (leixen_dualbank.py)
Updated by Chris Baumbach over 6 years ago
I've been struggling with my VV-898 v1.08 all morning, was finally able to get CHIRP to work by doing the following:
- perform factory reset by holding "M" button for two seconds immediately after power on and choosing reset all
- manually save and name one or two frequencies via the front panel buttons and menus
- download leixen_dualbank.py from issue #4069, and "enable developer functions" within CHIRP
- download information from radio
- upload information to radio
Perhaps somehow the radio doesn't accept CHIRP uploads properly until it has been programmed manually at least once? Seems to work for me now.
Updated by Bernhard Hailer over 4 years ago
- Status changed from In Progress to Closed
- Target version set to chirp-legacy
Appears to be complete.
Actions