Cannot get chirp to run
Running on iMac, OSX 10.11.6. Tried installing chirp using brew install and it runs but never able to open the USB serial port. I am using the factory Btech FTDI cable and OSX system reports shows this to be present. I also
tried with the chirp.app Mac app with no success. I also tried installing the latest FTDI driver which did not help. When running from terminal, I get this message when I go to download from UV-5X3 :
[Errno 2] could not open port /dev/cu.usbserial-AC01JAMM: [Errno 2] No such file or directory: '/dev/cu.usbserial-AC01JAMM'
Any suggestions would be appreciated.
Updated by Ira Fuchs about 5 years ago
I need to correct my Description. Chirp works fine on the Btech UV-5X3. The problem I am having as described above is with a Yaesu VX-5R (with the corresponding cable)
Updated by Bernhard Hailer over 3 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to Yaesu VX-5R
- Platform changed from Windows to MacOS
I'm not a MacOS expert; but this looks like a driver, cable, or serial port issue.
Perhaps one of these articles can help:
CableGuide FTDI OEM Cables
If there's no solution to be found in any of them, please read: How To Report Issues and provide a debug log. Thank you!
Updated by Bernhard Hailer about 3 years ago
- Status changed from Feedback to Closed
No more feedback by submitter.