Project

General

Profile

Actions

Bug #5971

closed

few issues

Added by Bryan Santucci over 6 years ago. Updated almost 5 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
07/22/2018
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
Windows
Debug Log:
I read the instructions above:

Description

1- open chirp, upload, make changes, upload to radio, chirp stop halfway through, but radio is programmed, must restart PC, any thoughts?

2- multiple uploads and resets to radio uv-5rHP keeps same name wont change

Actions #1

Updated by Jim Unroe over 6 years ago

  • Status changed from New to Feedback

Bryan,

Look in Device Manager to see which brand of USB-to-TTL chip the programming cable was manufactured with (see link below for instructions). If it is Prolific, you will either have to download, install and select an older Prolific device driver (V3.2.0.0 is recommended).

"USB Cables and Drivers for Microsoft XP, Vista, Win7, Win8, Win10":http://www.miklor.com/COM/UV_Drivers.php

Jim KC9HI

Actions #2

Updated by Bryan Santucci over 6 years ago

was a cable issue, I used a diff cable programmed perfectly! I have 2 cables and both were amazon 10$ no issues until now, def bought the FTDI chip one that is on the btech site apparently much better and no issues w prolific drivers etc

Actions #3

Updated by Bernhard Hailer almost 5 years ago

  • Status changed from Feedback to Closed
  • Priority changed from Urgent to Normal

Resolved.

Actions

Also available in: Atom PDF