Project

General

Profile

Actions

Bug #6389

open

Puxing PX-2R errors reading/writing memories, fails miserably.

Added by Dave Baxter about 5 years ago. Updated almost 4 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
01/20/2019
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Puxing PX-2R
Platform:
Linux
Debug Log:
I read the instructions above:

Description

Hi.

CHIRP daily-20190120 On Linux Mint 19.1 64 bit, installed from Chirp ppa.

Trying to read and write to my Puxing PX-2R, fails.

Reading sort of happens, but the data extracted as shown is very wrong.

Writing (if you try) either after a lot of editing of the .img file, or creating new from scratch, "bricks" the rig, needing a factory reset, and loss of what might have been in the memories already. (Done that several times now!)

I can happily talk to myself with a serial com's program (cutecom) via the programming lead, so that appears OK.

Debug log attached (zipped) also the output from Chirpw when launched from a terminal to do the same, as well as the .img as chirp creates it.

Memories 1 & 2 have local UHF repeaters in (GB3MK 433.000 + 1.6MHz shift. And GB3NP 430.8875 + 7.6MHz shift) but show as "empty"

Memory 3 has a PBR frequency in (461.5125) that sort of shows but is shown wrong.

All the other memories ARE empty.;

Log and .img files attached as zips. (Plain zip format.)

Using Chirp with a Kenwood TM-V71 works fine.

73.

Dave G0WBX (G8KBV)


Files

px2r_debug.log.zip (4.43 KB) px2r_debug.log.zip zipped debug log Dave Baxter, 01/20/2019 08:31 AM
px2r.zip (2.21 KB) px2r.zip zipped terminal output and .img files Dave Baxter, 01/20/2019 08:31 AM
reading_px-2r_memories.txt (9.71 KB) reading_px-2r_memories.txt Dave Baxter, 05/27/2020 01:49 PM
Puxing_PX-2R_20190120.img (4.13 KB) Puxing_PX-2R_20190120.img Dave Baxter, 05/27/2020 01:51 PM
debug.log (32.7 KB) debug.log Dave Baxter, 05/27/2020 01:51 PM
Actions

Also available in: Atom PDF