Project

General

Profile

Actions

Bug #6637

closed

Icom V82 problem

Added by Robert Dixon over 5 years ago. Updated almost 2 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
03/24/2019
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Icom IC-V82
Platform:
Windows
Debug Log:
I read the instructions above:

Description

When I send data from the radio to the PC, it corrupts some of the data IN THE RADIO. I know this sounds unlikely.
Chirp changes about half of the offset directions to be reverse, and it changes about half of the offset amounts from 600 to 750.
It also duplicates some of the entries, over-writing those that were in those memory spots. It happens every time I try it.
There may be others random changes.
I have struggled with this for some time now.
I have used chirp many times on other radios, so I know basically what I am doing.

I am using a cable from Mark Dunkle KJ6ZWL and he has been very helpful in this, and suggested I send you this info.
He suggested I try the standard Icom software for the radio, so I did and it worked fine.

Thanks for a great program otherwise!

73,

Bob W8ERD

I do not have any dumps etc, as I did not read about that until I came to this site to report the problem. I don't want to go
back to chirp with this radio and start over again.

Actions #1

Updated by Bernhard Hailer over 4 years ago

  • Target version set to chirp-legacy
  • Model affected changed from (All models) to Icom IC-V82

We'll keep this ticket open in case someone else runs into it.
If this happens, please provide a debug log as described in the Wiki: "How To Report Issues". Thanks!

Actions #2

Updated by Dan Smith almost 2 years ago

  • Status changed from New to Closed
  • Assignee set to Dan Smith
  • Target version changed from chirp-legacy to chirp-py3

This may be fixed by commit:c0ede54 in chirp-next

Actions

Also available in: Atom PDF