Bug #6829
closedTuning step not supported for Leixen VV-898s
0%
Description
Hi all,
I hope that this will not get lost in the pot of issues.
I have been trying to program my Leixen VV-898s v1.08B with a set of frequencies (attached as "Radio Template.csv"), and CHIRP does not accept a tuning step of 12.5kHz, and so rejects half of my frequencies that I need for work. (attached examples in .png form). I am using the model VV-898sDualBank, from Issue #4069 , as any other option ruins the channel setup. The Leixen software does not support the 1.08 yet, and so does not work.
If anyone could provide any insight to this, it would be greatly appreciated.
-Eren
Files
Updated by Niamh Holding over 5 years ago
It used to work with onder versions of CHIRP, but not the current version
Attached for reference is an .img from a while ago that' was fine and editable back then.
Updated by Eren Ozpinar over 5 years ago
Do you recommend me to do anything? I'm not really sure what to do as i can't program half my frequencies.
-Eren
Updated by Niamh Holding over 5 years ago
I'm going to try an older nightly of CHIRP later today and will report back
Updated by Niamh Holding over 5 years ago
chirp-daily-20181214-installer seems fine with leixen_dualbank.py loaded
Updated by Eren Ozpinar over 5 years ago
Do you happen to have the installer? I can't seem to find it.
Updated by Niamh Holding over 5 years ago
That just happened to be the previous version I downloaded and had locally. You could try-
https://trac.chirp.danplanet.com/chirp_daily/daily-20190102/chirp-daily-20190102-installer.exe
Updated by Jim Unroe almost 5 years ago
- Status changed from New to Feedback
The tuning step issues should have been resolved back in March by issue #6523.
Jim KC9HI
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
- Target version set to chirp-legacy
Should be resolved. No more feedback by submitters.